DPB_a013 — Soft Pedal Char
Full alert identifier: DPB_a013_softPedalChar
Alert description
Pressure sensor value too low for current Pedal Travel Sensor value.
Potential impact
System will be running with internal degraded pedal map. Braking may require increased effort.
Set condition
The pressure sensor value is too low, the Pedal Travel Sensor value is too high, there is air in the hydaulic circuit, or there is a leak in the hydraulic circuit. A Brake Signal Monitoring (BSM) soft pedal characteristic alert occurs if the current pressure sensor value is too low for the current pedal travel sensor value.
Clear condition
Good Check is performed, if pressure value is above issue detection limit for corresponding Pedal Travel sensor value and issue detection limit is > 0 bar.
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DPB_a013.