DPB_a005 — Hard Pedal Char
Full alert identifier: DPB_a005_hardPedalChar
Alert description
Pressure sensor value too high for current Pedal Travel Sensor value.
Potential impact
System will request Hydraulic Boost Compensation when driver pressed the brake pedal.
Set condition
The pedal pressure sensor value is too high, the pedal travel sensor value is too low, or there is additional volume in the hydraulic circuit.
Clear condition
Good Check is performed, if pressure value is below issue detection limit for corresponding Pedal Travel sensor value
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DPB_a005.