VCDOORFR_a316 — Mirror Premature Fold Stall

Full alert identifier: VCDOORFR_a316_mirrorPrematureFoldStall

Alert description

A side-view mirror started a fold or unfold movement, but then stalled before finishing the movement. The mirror will attempt 1 retry to complete the movement.

Potential impact

The mirror will stop for 400ms before attempting the retry. If the mirror unexpectedly stalls again during the retry, it may be left partially folded/unfolded.

Set condition

Sets if the mirror folding motor current exceeds 0.5A at some point, but then decreases to below 0.1A between 200ms - 1750ms after the beginning of actuation. Also sets at the end of the retry actuation to capture/log additional data.

Clear condition

Clears after 10ms.

Signals to check

These diagnostic fields are associated with VCDOORFR_a316. Check the alert's Alert Log in Service Mode Plus for available values.

Signal	Unit
Actuation Duration Ms `VCDOORFR_a316_actuationDurationMs`	ms
Ambient Temperature Deg C `VCDOORFR_a316_ambientTemperatureDegC` 0 SNA	degC
Average Current Amps `VCDOORFR_a316_averageCurrentAmps`	A
Fold State `VCDOORFR_a316_foldState` 0 UNKNOWN 1 FOLDED 2 UNFOLDED 3 FOLDING 4 UNFOLDING	—
Max Current Amps `VCDOORFR_a316_maxCurrentAmps`	A

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of VCDOORFR_a316.