EGGRIGHT1_a455 — Frunk Strut Actuator Undercurrent

Full alert identifier: EGGRIGHT1_a455_frunkStrutActuatorUndercurrent

Alert description

The vehicle controller detects an undercurrent condition on the front trunk (or frunk) strut actuator, indicating the 48V rail may be down.

Potential impact

The front trunk strut may be unable to actuate, preventing the front trunk from opening or closing.

Set condition

Firmware is commanding the frunk strut to actuate but the strut actuator draws less than 50mA for 300ms, and the velocity of the actuator is less than 1 deg/s.

Clear condition

The front trunk strut actuator draws more than 50mA, or firmware stops attempting to actuate the frunk strut.

Signals to check

These diagnostic fields are associated with EGGRIGHT1_a455. Check the alert's Alert Log in Service Mode Plus for available values.

Signal	Unit
48 V SW Voltage `EGGRIGHT1_a455_48V_SWVoltage`	V
Liftgate Position `EGGRIGHT1_a455_liftgatePosition`	deg
Liftgate State `EGGRIGHT1_a455_liftgateState`	—
Liftgate Strut Current `EGGRIGHT1_a455_liftgateStrutCurrent`	A
Liftgate Strut Duty `EGGRIGHT1_a455_liftgateStrutDuty`	%
Liftgate Velocity `EGGRIGHT1_a455_liftgateVelocity`	deg/s

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of EGGRIGHT1_a455.