Tests communication with the Vehicle Controller Seat 1st Row Passenger (VCSEATP) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCSEATP
Model S / X (2021+)
Tests communication with the Vehicle Controller Seat 1st Row Passenger (VCSEATP) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCSEATP
Model S / X (legacy)
Assigns the seat controller ECU to be the Passenger Seat Controller (VCSEATP) after installing the seat controller on the passenger side of the vehicle.
PROC_VCSEATP_X_SIDE-LEARN
Model S / X (2021+)
Pairs the immobilizer between the Vehicle Security Controller (VCSEC) and Drive Interface (DI). Initializes the odometer. Requires vehicle connectivity.
PROC_DI_X_PAIR-IMMOBILIZER-AND-VEHICLE-ODOMETER
Model 3 / Y
Model S / X (2021+)
Tests communication with the Security Vehicle Controller (VCSEC) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCSEC
Model 3 / Y
Model S / X (2021+)
Resets the Vehicle Security (VCSEC) Electronic Control Unit (ECU). Reset is executed via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
TEST-RESET_VCSEC
Model 3 / Y
Model S / X (2021+)
Tests connection and calibration of all four airwave channels of the second row controlled by the Center Console USB and HVAC Controller (VCUSB) Electronic Control Unit (ECU).
TEST-SELF_VCUSB_X_HVAC-ACTUATOR
Model 3 / Y
Sets Gateway (GTW) configuration with a safe GTW refresh.
PROC_ICE_X_SAFE-SET-VEHICLE-CONFIGS
Model 3 / Y
Model S / X (2021+)
Access the vehicle's service history, including both maintenance and repair records. Service history includes all work performed on the vehicle. The availability of maintenance and repair history options may vary depending on the vehicle model and configuration.
PROC_ICE_X_GET-SERVICE-HISTORY
Model 3 / Y
Model S / X (legacy)
Model S / X (2021+)
Tests the functionality of the voice command button located on the steering wheel.
PROC_SCCM_X_SCCM-TOP-RIGHT
Model S / X (legacy)
The procedure sends a wake signal to the center display, emulating a touch to turn on the center display in the Infotainment and Connectivity ECU (ICE).
PROC_ICE_X_WAKE-DISPLAY
Model 3 / Y
Model S / X (legacy)
Model S / X (2021+)
The procedure sends a wake signal to the center display, emulating a touch to turn on the center display in the Infotainment and Connectivity ECU (ICE).
PROC_ICE_X_WAKE-DISPLAY
Model S / X (legacy)
This check verifies that the washer nozzle turn on and heat up when triggered. These heaters are on the washer nozzles on the underside of the hood.
PROC_CID_FRONT_WASHER-NOZZLE-HEATER
Model S / X (legacy)
This test turns the washer nozzle heaters off.
PROC_CID_FRONT_WASHER-NOZZLE-HEATER-OFF
Model S / X (legacy)
Tests for power and connection of the front right wheel speed sensor controlled by Electronic Stability Program (ESP).
TEST-ESP_FRONT-R-WHEEL-SENSOR
Model 3 / Y
Model S / X (2021+)
Tests for power and connection of the rear left wheel speed sensor controlled by Electronic Stability Program (ESP).
TEST-ESP_REAR-L-WHEEL-SENSOR
Model 3 / Y
Model S / X (2021+)
Tests connection of wheel-end accelerometers to the Tesla Air Suspension (TAS) Electronic Control Unit (ECU).
TEST-SELF_TAS_X_ACCELS-CONNECTION
Model 3 / Y
Checks the current Wi-Fi connection status.
PING-BASH_WIFI-STATUS
Model 3 / Y
Model S / X (2021+)
This tests the status of Wi-Fi.
TEST-BASH_CID_X_WIFI-STATUS-TEST
Model S / X (legacy)
Calibrates all window endstops and pinch detection. Before running the routine, ensure all doors are closed. After starting the routine, do not open any door or press any window switch button.
PROC_VC_X_CALIBRATE-WINDOWS
Model 3 / Y
Model S / X (2021+)
Depending on the windshield installed, the Temperature Humidity Sensor (THS) will be configured different.
Run this routine after replacing the windshield and select the windshield part number to ensure nominal HVAC performance.
PROC_VCRIGHT_X_WINDSHIELD-REPLACEMENT
Model 3 / Y
Tests for power, connection, and communication of the windshield heater controlled by the Front Battery Controller (VCBATT2).
TEST-SELF_VCBATT2_X_AP-HEATER
Model 3 / Y
Tests the power, connection, and communication of the windshield heater controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_AP-HEATER
Model 3 / Y
Model S / X (2021+)
Passes if low fluid level is detected. Fails if switch is disconnected or fluid level is not low.
TEST-SELF_VCBATT2_X_WASHER-FLUID-LEVEL-SWITCH
Model 3 / Y