Set Modem Only Power State
Sets modem on / off / cycle. 'on' state be restored by qtcar-connman if it is currently running.
PROC_ICE_X_SET-MODEM-ONLY-POWER-STATE
The service task reference · 2026
Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
2026 firmware
Model 3, Y, S & X
1,357 tasks Showing 1105–1128
Browse by name, A–Z
Sets modem on / off / cycle. 'on' state be restored by qtcar-connman if it is currently running.
PROC_ICE_X_SET-MODEM-ONLY-POWER-STATE
Sets modem power state and stops / starts related cell processes. Power_state can be 'on', 'off', or 'cycle'.
PROC_ICE_X_SET-MODEM-POWER-STATE
Sets the production flag on the Redundant Control Unit (RCU) to the production state
PROC_RCU_SET-PRODUCTION-FLAG
The procedure dims the side mirrors (if the mirror hardware support this feature), regardless of external lighting condition or gear in the Left Vehicle Controller (VCLEFT) and the Right Vehicle Controller (VCRIGHT) ECUs.
PROC_VCLEFT-VCRIGHT_FRONT_DIM-MIRRORS
Set the TPMS type configuration to indirect TPMS (iTPMS) or Tesla BLE
PROC_TPMS_X_SET-TPMSTYPE-CONFIG
Set the TPMS type configuration to indirect TPMS (iTPMS) or Tesla BLE
PROC_TPMS_X_SET-TPMSTYPE-CONFIG
The procedure generates a random four digit Valet Mode PIN and optionally enables Valet Mode on a delivered vehicle.
PROC_ICE_X_SET-VALET-MODE-UNDELIVERED
The test displays all public keys on the whitelist of the Security Controller (VCSEC) and optionally shows permissions.
TEST_VCSEC_X_DISPLAY-KEY-WHITELIST
List folder filesystem information. User input specefies which folder to examine.
PROC_ICE_X_INFO-DIR-STAT
Tests for power, connection, and communication of the shut-off valve controlled by the Front Vehicle Controller (VCFRONT2).
TEST-SELF_VCFRONT2_X_SOLENOID
Tests for power, connection, and communication of the shut-off valve controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_SOLENOID
Enables or disables the onboard embedded SIM. When the embedded SIM is disabled, the external SIM card is used. The procedure may take a few minutes to complete. To maintain connectivity, make sure a physical SIM card is present in the external slot when disabling the onboard SIM.
PROC_ICE_X_ENABLE-DISABLE-SIM-CARD
Checks the State of Charge (SOC) on the vehicle.
PROC_CID_X_DV-CHARGE-PERCENT-CHECK-NA
Resets all HV battery brick State of Charge (SOC) values based on the latest Open Circuit Voltage (OCV) brick measurements. During normal operation, the HVBMS ECU calculates brick SOCs from multiple data sources. This routine should be executed when the SOC is >90% or <15% and the HV battery has rested (not charging, driving, or climate ON) for at least one hour within that SOC range.
PROC_HVBMS_X_RESET-SOC
Soft-fuse or un-soft-fuse infotainment
PROC_ICE_X_SOFT-FUSE
Resets the HV battery State of Health (SOH) state, enabling a new SOH test to be performed if previously inhibited.
PROC_HVX_X_RESET-SOH
Checks the electrical connection between the base speaker and the center instrument panel (IP).
TEST-BASH_SPK-BASE_FRONT-C_IP
Checks the electrical connection of the premium speaker in the left dash panel.
TEST-BASH_SPK-PREM_FRONT-L_HEADLINER
Checks the electrical connection of the premium speaker in the dash panel.
TEST-BASH_SPK-PREM_FRONT-R_HEADLINER
Checks the electrical connection between the left base speaker and the tweeter in the front door.
TEST-BASH_SPK-BASE_FRONT-L_DOOR
Checks the electrical connection between the right base speaker and the tweeter in the front door.
TEST-BASH_SPK-BASE_FRONT-R_DOOR
Checks the electrical connection between the base speaker and the front left instrument panel (IP).
TEST-BASH_SPK-BASE_FRONT-L_IP
Checks the electrical connection between the base speaker and the front right instrument panel (IP).
TEST-BASH_SPK-BASE_FRONT-R_IP
Checks the electrical connection between the base speaker and the left rear door.
TEST-BASH_SPK-BASE_REAR-L_DOOR
Descriptions and input definitions come from Tesla’s 2026 vehicle firmware. This catalog includes tasks covered by Tesware’s current service access. Each task page lists the vehicle and firmware versions in which it was found. The connected vehicle confirms whether a task can run.
Cybertruck is not included in this 2026 reference.