Show all public keys on whitelist
The test displays all public keys on the whitelist of the Security Controller (VCSEC) and optionally shows permissions.
TEST_VCSEC_X_DISPLAY-KEY-WHITELIST
Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
857 tasks Showing 697–720
Clear filtersThe test displays all public keys on the whitelist of the Security Controller (VCSEC) and optionally shows permissions.
TEST_VCSEC_X_DISPLAY-KEY-WHITELIST
List folder filesystem information. User input specefies which folder to examine.
PROC_ICE_X_INFO-DIR-STAT
Tests for power, connection, and communication of the shut-off valve controlled by the Front Vehicle Controller (VCFRONT2).
TEST-SELF_VCFRONT2_X_SOLENOID
Tests for power, connection, and communication of the shut-off valve controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_SOLENOID
Enables or disables the onboard embedded SIM. When the embedded SIM is disabled, the external SIM card is used. The procedure may take a few minutes to complete. To maintain connectivity, make sure a physical SIM card is present in the external slot when disabling the onboard SIM.
PROC_ICE_X_ENABLE-DISABLE-SIM-CARD
Checks the State of Charge (SOC) on the vehicle.
PROC_CID_X_DV-CHARGE-PERCENT-CHECK-NA
Resets all HV battery brick State of Charge (SOC) values based on the latest Open Circuit Voltage (OCV) brick measurements. During normal operation, the HVBMS ECU calculates brick SOCs from multiple data sources. This routine should be executed when the SOC is >90% or <15% and the HV battery has rested (not charging, driving, or climate ON) for at least one hour within that SOC range.
PROC_HVBMS_X_RESET-SOC
Soft-fuse or un-soft-fuse infotainment
PROC_ICE_X_SOFT-FUSE
Resets the HV battery State of Health (SOH) state, enabling a new SOH test to be performed if previously inhibited.
PROC_HVX_X_RESET-SOH
Checks the electrical connection between the base speaker and the center instrument panel (IP).
TEST-BASH_SPK-BASE_FRONT-C_IP
Checks the electrical connection of the premium speaker in the left dash panel.
TEST-BASH_SPK-PREM_FRONT-L_HEADLINER
Checks the electrical connection of the premium speaker in the dash panel.
TEST-BASH_SPK-PREM_FRONT-R_HEADLINER
Checks the electrical connection between the left base speaker and the tweeter in the front door.
TEST-BASH_SPK-BASE_FRONT-L_DOOR
Checks the electrical connection between the right base speaker and the tweeter in the front door.
TEST-BASH_SPK-BASE_FRONT-R_DOOR
Checks the electrical connection between the base speaker and the front left instrument panel (IP).
TEST-BASH_SPK-BASE_FRONT-L_IP
Checks the electrical connection between the base speaker and the front right instrument panel (IP).
TEST-BASH_SPK-BASE_FRONT-R_IP
Checks the electrical connection between the base speaker and the left rear door.
TEST-BASH_SPK-BASE_REAR-L_DOOR
Checks the electrical connection between the base speaker and the right rear door.
TEST-BASH_SPK-BASE_REAR-R_DOOR
Checks the electrical connection for a combination of base and premium speakers in the front instrument panel.
TEST-BASH_SPK_ICE_BASE-PREM
Overrides the drive unit speed and torque limits set by Factory or Service Mode.
PROC_ICE_X_ENTER-LIMIT-OVERRIDE
Starts the Close Refrigerant Valves routine and returns. The routine will run for up to 5 hours, but the final results are not reported
PROC_VCFRONT2_X_START-CLOSE-REFRIGERANT-VALVES
Starts the Close Refrigerant Valves routine and returns. The routine will run for up to 5 hours, but the final results are not reported
PROC_VCFRONT_X_START-CLOSE-REFRIGERANT-VALVES
Activates Service Mode on the left Electronic Park Break (EPBL).
PROC_EPBL_START-SERVICE-MODE
Activates Service Mode on the right Electronic Park Break (EPBR).
PROC_EPBR_START-SERVICE-MODE