Front Right Seat Lumbar Test
Tests for power, connection, and communication of the front right seat lumbar controlled by the Right Vehicle Controller (VCRIGHT).
TEST-SELF_VCRIGHT_FRONT-R_SEAT-LUMBAR
Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
857 tasks Showing 289–312
Clear filtersTests for power, connection, and communication of the front right seat lumbar controlled by the Right Vehicle Controller (VCRIGHT).
TEST-SELF_VCRIGHT_FRONT-R_SEAT-LUMBAR
Calibrates front right window endstops for pinch detection. Ensure front right door is closed. Do not open the door or press the window switch button while the routine runs.
TEST-SELF_VCRIGHT_FRONT-R_CALIBRATE-WINDOW
Move window to a specified position.
PROC_VCRIGHT_FRONT-R_COMMAND-WINDOW-POSITION
Checks the electrical connection of the right front woofer.
TEST-BASH_SPK-PREM_FRONT-R_WOOFER
Programs the address of the front Ultrasonic Sensors (USS).
PROC_USM_FRONT_PROGRAM-USS-ADDRESSES
Tests communication with the front vehicle controller (VCBATT) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCBATT
Tests communication with the front vehicle controller (VCBATT1) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCBATT1
Tests communication with the front vehicle controller (VCBATT2) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCBATT2
Tests communication with the front vehicle controller (VCFRONT) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCFRONT1
Tests communication with the front vehicle controller (VCFRONT) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCFRONT2
Tests communication with the front vehicle controller (VCFRONT) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
PING-TP_VCFRONT_ALL
Tests for power, connection, and communication of the lockout circuit controlled by the Front Vehicle Controller (VCFRONT1).
TEST-SELF_VCFRONT1_X_LOCKOUT-CIRCUIT
Tests for power, connection, and communication of the lockout circuit controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_LOCKOUT-CIRCUIT
Checks the electrical connection of the LED light in front trunk emergency release switch controlled by the Front Battery Controller (VCBATT2).
TEST-SELF_VCBATT2_X_FRUNK-LED
Checks the electrical connection of the LED light in front trunk emergency release switch controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_FRUNK-LED
The test releases the latch of the front trunk controlled by the Front Battery Controller (VCBATT2).
TEST-SELF_VCBATT2_X_FRUNK-LATCH
The test releases the latch of the front trunk controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_FRUNK-LATCH
The procedure fuses only the modem board when the other components are already fused. This is useful for modem replacements that were not fused in the factory. Production components should always be fused.
PROC_SEC_X_FUSE-MODEM
Tests communication with an Electronic Control Unit (ECU) selected by the user. Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN) and confirming a response within 5 seconds.
PING-TP_ECU
Retrieves component information for the Front Drive Unit and Inverter (DIF) Including: - Drive Unit Part Number - Drive Unit Serial Number - Inverter Part Number - Inverter Serial Number - Two Phase Open Pyro - Motor Type
PROC_DIF_X_GET-PARTS-INFO
Retrieves component information for the Rear Drive Unit and Inverter (DIR) Including: - Drive Unit Part Number - Drive Unit Serial Number - Inverter Part Number - Inverter Serial Number - Two Phase Open Pyro - Motor Type
PROC_DIR_X_GET-PARTS-INFO
Tests ability to enable and detect the glareshield heater.
TEST-SELF_VCRIGHT_X_GLARESHIELD-HEATER
Opens the glovebox and bypasses glovebox pin.
PROC_ICE_X-OPEN-GLOVEBOX
This test is an end to end check for the glovebox USB device.
TEST-BASH_CID_X_USB3-GLOVEBOX-SERVICE