Service procedures
12V Reset
Power cycles all of the eFuses on the Vehicle Front Controller (VCFRONT) and shuts off Sleep Bypass.
PROC_VCFRONT_X_12V-RESET
Model 3 / Y
Service procedures
2026 firmware
Ensure Power State Off
Gen3/tasks/PROC_VCFRONT_X_POWER-OFF
What this task does
Returns 12V power state control back to VCFRONT (terminates special power state requests)
Vehicle & firmware coverage
Open a version to see its description, requirements, and input definitions. Hardware configuration and live vehicle checks also determine availability.
Model 3 / Y AMD · Firmware 2026.32.3
- Vehicle coverage
- 2024+ Model 3, 2025+ Model Y, Model Y, Pre-2024 Model 3
- Supported connection
- Local connection
- Vehicle state
- Stationary · Parked; Stationary · Neutral
- Gateway diagnostic level
- No specific level listed
Task inputs (1)
timeout
timeout · Int
Timeout value in seconds. The system will only hold the power state for this timeout amount.
Firmware default: 60
Model 3 / Y Intel · Firmware 2026.32.7
- Vehicle coverage
- Model Y, Pre-2024 Model 3
- Supported connection
- Local connection
- Vehicle state
- Stationary · Parked; Stationary · Neutral
- Gateway diagnostic level
- No specific level listed
Task inputs (1)
timeout
timeout · Int
Timeout value in seconds. The system will only hold the power state for this timeout amount.
Firmware default: 60
Model S / X (2021+) AMD · Firmware 2026.20.6.1
- Vehicle coverage
- 2021+ Model S, 2021+ Model X
- Supported connection
- Local connection
- Vehicle state
- Stationary · Parked; Stationary · Neutral
- Gateway diagnostic level
- No specific level listed
Task inputs (1)
timeout
timeout · Int
Timeout value in seconds. The system will only hold the power state for this timeout amount.
Firmware default: 60
Related service tasks
Browse all tasks →
Self-tests
Active Louver Self Test
Performs louver connection check. Will only move the louver through partial range of motion.
TEST-SELF_VCFRONT_X_ACTIVE-LOUVER
Model 3 / Y
Service procedures
Allow High Beam Enablement in Factory Mode
Allows high beams to be enabled in Factory Mode until the Front Vehicle Controller (VCFRONT) ECU is power cycled.
PROC_VCFRONT_X_ALLOW-HIGH-BEAMS-FACTORY
Model S / X (2021+)
Self-tests
Ambient Sensor Test
Tests for power, connection, and communication of the ambient sensor controlled by the Front Vehicle Controller (VCFRONT).
TEST-SELF_VCFRONT_X_AMBIENT-TEMP
Model 3 / Y
Model S / X (2021+)