User interface alerts

UI alert codes

Showing 201–250 of 258

• UI_a206 — Modem MIA After Wake UI_a206_ModemMIAAfterWake Although the modem is requested to resume, it was not discovered on ethernet bus.
• UI_a208 — Mqtt Client Disconnected UI_a208_mqttClientDisconnected The tcp/ip connection between mqtt client and remote mqtt broker is no longer detected
• UI_a209 — Data Call Disconnected UI_a209_dataCallDisconnected No data call is active over the cellular network
• UI_a210 — Cellular CS Reg Fail UI_a210_CellularCSRegFail Indicates cellular Circuit-Switched (CS) network registration failure.
• UI_a211 — AEBS Disabled UI_a211_AEBSDisabled Active Safety Automatic Emergency Braking System (AEBS) feature faulted.
• UI_a212 — AEBS Faulted UI_a212_AEBSFaulted Active Safety Automatic Emergency Braking System (AEBS) feature unavailable
• UI_a213 — ISA Disabled UI_a213_ISADisabled Intelligent Speed Assist (ISA) feature is disabled during this time.
• UI_a214 — Pm Helper Failure UI_a214_pmHelperFailure The power-manager helper aborted sleep
• UI_a215 — Compositor Stall Detected UI_a215_compositorStallDetected The center display compositor watchdog detected compositor stopped updating
• UI_a216 — Audio A2b Circuit Problem UI_a216_AudioA2bCircuitProblem Node and type of circuit problem.
• UI_a217 — Cgroup Memory Pressure UI_a217_CgroupMemoryPressure One or more services in the User Interface (UI) process ID control group is using more memory than expected
• UI_a218 — Audiod No Audio Devices UI_a218_AudiodNoAudioDevices No hardware audio devices available in the system
• UI_a219 — Compositor Watchdog UI_a219_CompositorWatchdog System Compositor stalled and needed to be restarted
• UI_a220 — Media Browse Error UI_a220_MediaBrowseError The media browser detects an error during browsing. This may make the media browser unable to load the requested page.
• UI_a221 — Navigation Service Error UI_a221_NavigationServiceError The navigation service encountered an error when processing a navigation request.
• UI_a222 — QtCar Restart UI_a222_QtCarRestart Indicates that the User Interface (UI) main application, also known as QtCar, is intentionally rebooting due to a user-initiated action.
• UI_a223 — Database Error UI_a223_databaseError An error with a User Interface (UI) database was detected and the automatic recovery was not able to restore its functionality. Therefore some data from this database may be missing or incorrect and dependent features may not function as e…
• UI_a224 — Center Display Disconnected UI_a224_centerDisplayDisconnected The Media Control Unit (MCU) does not detect a connection to the center display.
• UI_a225 — Cluster Display Disconnected UI_a225_clusterDisplayDisconnected The Media Control Unit (MCU) does not detect a connection to the instrument cluster display.
• UI_a226 — Large Phone Contact Sync UI_a226_largePhoneContactSync A phone contact sync with more than 5000 contacts completed. Alert payload contains the number of contacts loaded.
• UI_a228 — Pipewire Xrun Burst UI_a228_pipewireXrunBurst Pipewire xrun burst detected which causes audio interruption
• UI_a229 — Ser Des Error UI_a229_SerDesError The User Interface (UI) Display Manager detects erroneous bits in the serializer or deserializer.
• UI_a230 — Modem Sim Card Mismatch UI_a230_ModemSimCardMismatch Correct SIM card is not installed on corresponding 4G or 5G Telematics Control Unit (TCU). 5G SIM card should be installed on 5G TCU only, and vice versa.
• UI_a231 — Sleep Cancelled UI_a231_SleepCancelled The User Interface (UI) detects the command to go to sleep was cancelled.
• UI_a232 — Process Exit Error UI_a232_processExitError Alert indicating a UI process has exited with an error, payload contains the exited process name and exit signal.
• UI_a233 — Modem RF Failure UI_a233_ModemRFFailure The cellular baseband Radio Frequency (RF) module did not initialize.
• UI_a234 — AMD I2C0 Timeout UI_a234_AMDI2C0Timeout AMD i2c Bus 0 encountered a timeout.
• UI_a235 — AMD I2C1 Timeout UI_a235_AMDI2C1Timeout AMD i2c Bus 1 encountered a timeout.
• UI_a236 — Modem On Reset State UI_a236_ModemOnResetState This alert indicates when the connectivity stack detects that the GSM-nRESTART pin value is not on the expected state
• UI_a237 — Clip Upload Active UI_a237_ClipUploadActive The User Interface (UI) is attempting to transfer or upload clips from the Driver Assistance Electronic Control Unit (ECU)
• UI_a238 — Modem Config Mismatch UI_a238_ModemConfigMismatch The modem configuration stored in the Media Control Unit (MCU) cache does not match the modem hardware installed in the vehicle, indicating there is a mismatch condition.
• UI_a240 — Eth Error UI_a240_ethError The User Interface (UI) Electronic Control Unit (ECU) detects a network device error during runtime.
• UI_a241 — Ax CP Error UI_a241_AxCPError AxCP chip is not responding or in a bad state
• UI_a242 — Ui Health Fault Injection Active UI_a242_uiHealthFaultInjectionActive The User Interface detects a manual fault injection to its autonomy health interface
• UI_a243 — Pm Display Check Failure UI_a243_pmDisplayCheckFailure The power-manager helper caught a persistent I2C failure in the Center Display
• UI_a244 — Segfault UI_a244_segfault Infotainment process stopped unexpectedly
• UI_a245 — Task Hung UI_a245_taskHung Infotainment process hung for extended period of time
• UI_a246 — Gpu Fence Timeout UI_a246_gpuFenceTimeout Infotainment GPU operation timed out
• UI_a247 — Stalkless Display Backlight Failure UI_a247_StalklessDisplayBacklightFailure The User Interface (UI) Display Manager has failed to execute a backlight brightness request.
• UI_a252 — T PM Error Receive UI_a252_TPMErrorReceive Failure while trying to receive data from TPM module
• UI_a253 — Maintenance History Recorded UI_a253_maintenanceHistoryRecorded An new entry was added to the odin maintenance history
• UI_a254 — App Certificate Expired UI_a254_appCertificateExpired Autopilot Primary Processor (APP) certificates are expired.
• UI_a255 — Apb Certificate Expired UI_a255_apbCertificateExpired Autopilot Backup Processor (APB) certificates are expired.
• UI_a256 — Sap Failed To Enable UI_a256_sapFailedToEnable SoftAP was not able to start.
• UI_a257 — Modem Rebooting UI_a257_modemRebooting Indicates a reboot of the modem application processor.
• UI_a258 — Sap Failed To Power On UI_a258_sapFailedToPowerOn SoftAP was not able to power on.
• UI_a259 — Sap Channel Mismatch UI_a259_sapChannelMismatch SoftAP expected to be on the same channel as STA.
• UI_a260 — Sap Wrong Channel UI_a260_sapWrongChannel SoftAP is on 2.4GHz channel instead of 5GHz.
• UI_a261 — Bluetooth Stack Panic UI_a261_bluetoothStackPanic Bluetooth is disabled due to lost connection to the chip.
• UI_a263 — Ecu Log Upload Failure UI_a263_ecuLogUploadFailure The ECULog process failed to upload logs from the Electronic Control Unit (ECU).