Left rear seat controller alerts

BCS2L alert codes

Showing 1–50 of 113

• BCS2L_a001 — Watchdog Reset BCS2L_a001_WatchdogReset Warns if the processor has experienced a reset due to watchdog reset.
• BCS2L_a002 — Power Loss Reset BCS2L_a002_PowerLossReset Warns if the processor has experienced a reset due to power loss.
• BCS2L_a003 — SW Assertion BCS2L_a003_SWAssertion An internal software assertion has failed.
• BCS2L_a005 — CANTX Error BCS2L_a005_CANTXError An error has been detected with CAN transmission. Used by engineering to debug.
• BCS2L_a006 — CANTX cyclic Error BCS2L_a006_CANTX_cyclicError An error has been detected within the CANTX cyclic dispatcher generated code. Used by engineering to debug.
• BCS2L_a010 — Ext Supply Volt Error BCS2L_a010_ExtSupplyVoltError The vehicle controller detects the supply voltage from 1 or more components is outside of the expected range.
• BCS2L_a012 — CPU Reset BCS2L_a012_CPUReset CPU detected a reset.
• BCS2L_a013 — Alert Manager Fault BCS2L_a013_AlertManagerFault Alert Manager encountered an internal processing error.
• BCS2L_a014 — Bridge Fault BCS2L_a014_BridgeFault Bridge faults are most likely due to configuration error.
• BCS2L_a015 — NVMM Error BCS2L_a015_NVMMError An issue is indicated from the non-volatile memory manager.
• BCS2L_a016 — NVMM Record Error BCS2L_a016_NVMMRecordError An issue is indicated from a particular non-volatile memory record.
• BCS2L_a021 — Task Scheduler Error BCS2L_a021_TaskSchedulerError If a task was not able to run at the appropriate time.
• BCS2L_a022 — Task Init Error BCS2L_a022_TaskInitError If a task failed to initialize.
• BCS2L_a029 — Core Dump BCS2L_a029_CoreDump Indicates an exception occurred and core dump data is present.
• BCS2L_a030 — ECU Log Upload Request BCS2L_a030_ECULogUploadRequest Triggers on board diagnostics service to upload log buffer.
• BCS2L_a031 — UDS Active BCS2L_a031_UDSActive A unified diagnostics services (UDS) request was made
• BCS2L_a040 — Track Motor Short BCS2L_a040_trackMotorShort 3930 Fault - short to GND, short to Supply, shorted motor winding
• BCS2L_a041 — High CPU Load BCS2L_a041_HighCPULoad CPU under heavy load.
• BCS2L_a042 — High Stack Usage BCS2L_a042_HighStackUsage High stack memory usage was detected
• BCS2L_a043 — Task1ms Error BCS2L_a043_Task1msError Debug information for 1ms task errors.
• BCS2L_a044 — Task10ms Error BCS2L_a044_Task10msError Debug information for 10ms task errors
• BCS2L_a045 — Task100ms Error BCS2L_a045_Task100msError Debug information for 100ms task errors.
• BCS2L_a046 — Task1000ms Error BCS2L_a046_Task1000msError Debug information for 1000ms task errors.
• BCS2L_a047 — 2 R Occupancy Fault SNA BCS2L_a047_2ROccupancyFaultSNA check occupancy sensor and harness, seat belt sensor and harness, damaged ECU
• BCS2L_a048 — 3 R Buckle Fault SNA BCS2L_a048_3RBuckleFaultSNA check occupancy sensor and harness, seat belt sensor and harness, damaged ECU
• BCS2L_a049 — 3 R Occupancy Fault SNA BCS2L_a049_3ROccupancyFaultSNA check occupancy sensor and harness, seat belt sensor and harness, damaged ECU
• BCS2L_a050 — Pitch Motor Over Curr BCS2L_a050_pitchMotorOverCurr Stall detection. Check for obstacle detected, high current readings, or running into pitch ends.
• BCS2L_a051 — Pitch Motor Under Curr BCS2L_a051_pitchMotorUnderCurr Current below expected, free spinning. Seat could have pitched out from its screw
• BCS2L_a052 — Pitch Motor Encode Error BCS2L_a052_pitchMotorEncodeError Encoder counts not changing as expected
• BCS2L_a053 — 2 RC Heatr Tmp Sns Invalid BCS2L_a053_2RCHeatrTmpSnsInvalid Check seat temperature sensor for fault
• BCS2L_a054 — 2 RC Seat Heat Slow Rise BCS2L_a054_2RCSeatHeatSlowRise Check seat heater pad for damage or disconnected seat heat pad wire
• BCS2L_a056 — 2 RC Heat Pad Temp Sens FLT BCS2L_a056_2RCHeatPadTempSensFLT Seat temperature sensor may be disconnected, shorted, or faulted
• BCS2L_a057 — 2 RC Buckle Fault SNA BCS2L_a057_2RCBuckleFaultSNA check occupancy sensor and harness, seat belt sensor and harness, damaged ECU
• BCS2L_a058 — Input R High Sync Debug BCS2L_a058_inputRHighSyncDebug Voltage drop on input power is high
• BCS2L_a059 — Input Resistance High BCS2L_a059_inputResistanceHigh A large voltage drop is detected in the input power to the vehicle controller, indicating the resistance on the input power feed to the vehicle controller is higher than expected.
• BCS2L_a060 — Engineering Build BCS2L_a060_engineeringBuild The software installed on the vehicle is intended for engineering use and development purposes only. The vehicle software may have some expected features disabled for testing purposes, or include new features whose function is not yet full…
• BCS2L_a061 — X CP Connected BCS2L_a061_XCPConnected Indicates an active connection to the universal measurement and calibration protocol state machine
• BCS2L_a062 — X CP Was Connected BCS2L_a062_XCPWasConnected Indicates there was an active connection to the universal measurement and calibration protocol state machine
• BCS2L_a063 — Switch Fault BCS2L_a063_SwitchFault A condition affecting switch functionality has been detected.
• BCS2L_a064 — Bus Sleep Req Timeout BCS2L_a064_busSleepReqTimeout Indicates if a bus has timed out of a sleep request from the network manager
• BCS2L_a065 — Latch Motor LSD BCS2L_a065_latchMotorLSD Overtemp, overload, current limitation, under voltage
• BCS2L_a066 — Latch Motor Over Curr BCS2L_a066_latchMotorOverCurr Latch motor encountered obstruction or end stop not handled by app
• BCS2L_a067 — Latch Motor Under Curr BCS2L_a067_latchMotorUnderCurr Check for damamged motor
• BCS2L_a068 — Latch Microswitch Error BCS2L_a068_latchMicroswitchError Check latch cable, damaged microswitch, latch obstruction, latch motor damaged, latch motor harness, damaged ECU
• BCS2L_a069 — 2 R Left Backrest Unlatched BCS2L_a069_2RLeftBackrestUnlatched The left second row seat backrest is unlatched.
• BCS2L_a070 — 2 R Occupied Unbuckled BCS2L_a070_2ROccupiedUnbuckled check occupancy sensor and harness, seat belt sensor and harness, damaged ECU
• BCS2L_a071 — 3 R Occupied Unbuckled BCS2L_a071_3ROccupiedUnbuckled check occupancy sensor and harness, seat belt sensor and harness, damaged ECU
• BCS2L_a072 — 2 R Obstacle Detected BCS2L_a072_2RObstacleDetected Rear seat may have collided with front seat or object blocking easy entry movement
• BCS2L_a073 — Occupied Unsecured BCS2L_a073_occupiedUnsecured Seat occupant was detected outside the comfort zone causing Easy Entry Latch to be unable achieve full forward engagement.
• BCS2L_a074 — 2 Row Track Obstacle BCS2L_a074_2RowTrackObstacle Rear seat may have collided with front seat or object blocking easy entry movement