Rear door control module alerts

BCRPM alert codes

Showing 1–50 of 56

• BCRPM_a001 — Watchdog Reset BCRPM_a001_WatchdogReset Warns if the processor has experienced a reset due to watchdog reset.
• BCRPM_a002 — Power Loss Reset BCRPM_a002_PowerLossReset Warns if the processor has experienced a reset due to power loss.
• BCRPM_a003 — SW Assertion BCRPM_a003_SWAssertion An internal software assertion has failed.
• BCRPM_a005 — CANTX Error BCRPM_a005_CANTXError An error has been detected with CAN transmission. Used by engineering to debug.
• BCRPM_a006 — CANTX cyclic Error BCRPM_a006_CANTX_cyclicError An error has been detected within the CANTX cyclic dispatcher generated code. Used by engineering to debug.
• BCRPM_a010 — Ext Supply Volt Error BCRPM_a010_ExtSupplyVoltError The vehicle controller detects the supply voltage from 1 or more components is outside of the expected range.
• BCRPM_a012 — CPU Reset BCRPM_a012_CPUReset CPU detected a reset.
• BCRPM_a013 — Alert Manager Fault BCRPM_a013_AlertManagerFault Alert Manager encountered an internal processing error.
• BCRPM_a015 — NVMM Error BCRPM_a015_NVMMError An issue is indicated from the non-volatile memory manager.
• BCRPM_a016 — NVMM Record Error BCRPM_a016_NVMMRecordError An issue is indicated from a particular non-volatile memory record.
• BCRPM_a021 — Task Scheduler Error BCRPM_a021_TaskSchedulerError If a task was not able to run at the appropriate time.
• BCRPM_a022 — Task Init Error BCRPM_a022_TaskInitError If a task failed to initialize.
• BCRPM_a029 — Core Dump BCRPM_a029_CoreDump Indicates an exception occurred and core dump data is present.
• BCRPM_a030 — ECU Log Upload Request BCRPM_a030_ECULogUploadRequest Triggers on board diagnostics service to upload log buffer.
• BCRPM_a031 — UDS Active BCRPM_a031_UDSActive A unified diagnostics services (UDS) request was made
• BCRPM_a041 — High CPU Load BCRPM_a041_HighCPULoad CPU under heavy load.
• BCRPM_a042 — High Stack Usage BCRPM_a042_HighStackUsage High stack memory usage was detected
• BCRPM_a043 — Task1ms Error BCRPM_a043_Task1msError Debug information for 1ms task errors.
• BCRPM_a044 — Task10ms Error BCRPM_a044_Task10msError Debug information for 10ms task errors
• BCRPM_a045 — Task100ms Error BCRPM_a045_Task100msError Debug information for 100ms task errors.
• BCRPM_a046 — Task1000ms Error BCRPM_a046_Task1000msError Debug information for 1000ms task errors.
• BCRPM_a058 — Input R High Sync Debug BCRPM_a058_inputRHighSyncDebug Voltage drop on input power is high
• BCRPM_a059 — Input Resistance High BCRPM_a059_inputResistanceHigh A large voltage drop is detected in the input power to the vehicle controller, indicating the resistance on the input power feed to the vehicle controller is higher than expected.
• BCRPM_a060 — Engineering Build BCRPM_a060_engineeringBuild The software installed on the vehicle is intended for engineering use and development purposes only. The vehicle software may have some expected features disabled for testing purposes, or include new features whose function is not yet full…
• BCRPM_a061 — X CP Connected BCRPM_a061_XCPConnected Indicates an active connection to the universal measurement and calibration protocol state machine
• BCRPM_a062 — X CP Was Connected BCRPM_a062_XCPWasConnected Indicates there was an active connection to the universal measurement and calibration protocol state machine
• BCRPM_a063 — Switch Fault BCRPM_a063_SwitchFault A condition affecting switch functionality has been detected.
• BCRPM_a064 — Bus Sleep Req Timeout BCRPM_a064_busSleepReqTimeout Indicates if a bus has timed out of a sleep request from the network manager
• BCRPM_a065 — Wrong Upper Latch State BCRPM_a065_WrongUpperLatchState
• BCRPM_a066 — Window Regulator BCRPM_a066_WindowRegulator
• BCRPM_a067 — Obstacle Detected BCRPM_a067_ObstacleDetected
• BCRPM_a068 — Pinch Detected BCRPM_a068_PinchDetected
• BCRPM_a069 — Falcon External Switch BCRPM_a069_FalconExternalSwitch
• BCRPM_a070 — Proactive Sensors BCRPM_a070_ProactiveSensors
• BCRPM_a071 — Reactive Sensors BCRPM_a071_ReactiveSensors
• BCRPM_a072 — Latch Upper Front BCRPM_a072_LatchUpperFront
• BCRPM_a073 — Latch Upper Rear BCRPM_a073_LatchUpperRear
• BCRPM_a074 — Falcon Shutface Switch BCRPM_a074_FalconShutfaceSwitch
• BCRPM_a075 — Locked Door Opened BCRPM_a075_LockedDoorOpened
• BCRPM_a076 — Locked Window Opened BCRPM_a076_LockedWindowOpened
• BCRPM_a077 — Latch Release Failure BCRPM_a077_LatchReleaseFailure This alert may be caused by ice/water ingress into the latch mechanism. The failure may go away after the vehicle has spent some time in a warm environment.
• BCRPM_a078 — Window Comm Error BCRPM_a078_WindowCommError
• BCRPM_a079 — Dvr Side Cfg Mismatch BCRPM_a079_DvrSideCfgMismatch reseting the controller should fix the issue
• BCRPM_a080 — Window Switch LED BCRPM_a080_WindowSwitchLED
• BCRPM_a081 — Ambient Illumination BCRPM_a081_AmbientIllumination
• BCRPM_a082 — Shutface Switch LED BCRPM_a082_ShutfaceSwitchLED
• BCRPM_a083 — Reflector Lamp BCRPM_a083_ReflectorLamp
• BCRPM_a084 — Drv Side Button Stuck BCRPM_a084_DrvSideButtonStuck
• BCRPM_a085 — Pass Side Button Stuck BCRPM_a085_PassSideButtonStuck
• BCRPM_a086 — Door Config Error BCRPM_a086_DoorConfigError Check if DOOR_READ_EN is enabled (pulled low) at startup; check that the doorID pins are being set low in correspondence with the desired side; run UDS routine 204 on the bootloader to read and store the side config