Rear door control module alerts

BCRDM alert codes

Showing 1–50 of 56

• BCRDM_a001 — Watchdog Reset BCRDM_a001_WatchdogReset Warns if the processor has experienced a reset due to watchdog reset.
• BCRDM_a002 — Power Loss Reset BCRDM_a002_PowerLossReset Warns if the processor has experienced a reset due to power loss.
• BCRDM_a003 — SW Assertion BCRDM_a003_SWAssertion An internal software assertion has failed.
• BCRDM_a005 — CANTX Error BCRDM_a005_CANTXError An error has been detected with CAN transmission. Used by engineering to debug.
• BCRDM_a006 — CANTX cyclic Error BCRDM_a006_CANTX_cyclicError An error has been detected within the CANTX cyclic dispatcher generated code. Used by engineering to debug.
• BCRDM_a010 — Ext Supply Volt Error BCRDM_a010_ExtSupplyVoltError The vehicle controller detects the supply voltage from 1 or more components is outside of the expected range.
• BCRDM_a012 — CPU Reset BCRDM_a012_CPUReset CPU detected a reset.
• BCRDM_a013 — Alert Manager Fault BCRDM_a013_AlertManagerFault Alert Manager encountered an internal processing error.
• BCRDM_a015 — NVMM Error BCRDM_a015_NVMMError An issue is indicated from the non-volatile memory manager.
• BCRDM_a016 — NVMM Record Error BCRDM_a016_NVMMRecordError An issue is indicated from a particular non-volatile memory record.
• BCRDM_a021 — Task Scheduler Error BCRDM_a021_TaskSchedulerError If a task was not able to run at the appropriate time.
• BCRDM_a022 — Task Init Error BCRDM_a022_TaskInitError If a task failed to initialize.
• BCRDM_a029 — Core Dump BCRDM_a029_CoreDump Indicates an exception occurred and core dump data is present.
• BCRDM_a030 — ECU Log Upload Request BCRDM_a030_ECULogUploadRequest Triggers on board diagnostics service to upload log buffer.
• BCRDM_a031 — UDS Active BCRDM_a031_UDSActive A unified diagnostics services (UDS) request was made
• BCRDM_a041 — High CPU Load BCRDM_a041_HighCPULoad CPU under heavy load.
• BCRDM_a042 — High Stack Usage BCRDM_a042_HighStackUsage High stack memory usage was detected
• BCRDM_a043 — Task1ms Error BCRDM_a043_Task1msError Debug information for 1ms task errors.
• BCRDM_a044 — Task10ms Error BCRDM_a044_Task10msError Debug information for 10ms task errors
• BCRDM_a045 — Task100ms Error BCRDM_a045_Task100msError Debug information for 100ms task errors.
• BCRDM_a046 — Task1000ms Error BCRDM_a046_Task1000msError Debug information for 1000ms task errors.
• BCRDM_a058 — Input R High Sync Debug BCRDM_a058_inputRHighSyncDebug Voltage drop on input power is high
• BCRDM_a059 — Input Resistance High BCRDM_a059_inputResistanceHigh A large voltage drop is detected in the input power to the vehicle controller, indicating the resistance on the input power feed to the vehicle controller is higher than expected.
• BCRDM_a060 — Engineering Build BCRDM_a060_engineeringBuild The software installed on the vehicle is intended for engineering use and development purposes only. The vehicle software may have some expected features disabled for testing purposes, or include new features whose function is not yet full…
• BCRDM_a061 — X CP Connected BCRDM_a061_XCPConnected Indicates an active connection to the universal measurement and calibration protocol state machine
• BCRDM_a062 — X CP Was Connected BCRDM_a062_XCPWasConnected Indicates there was an active connection to the universal measurement and calibration protocol state machine
• BCRDM_a063 — Switch Fault BCRDM_a063_SwitchFault A condition affecting switch functionality has been detected.
• BCRDM_a064 — Bus Sleep Req Timeout BCRDM_a064_busSleepReqTimeout Indicates if a bus has timed out of a sleep request from the network manager
• BCRDM_a065 — Wrong Upper Latch State BCRDM_a065_WrongUpperLatchState
• BCRDM_a066 — Window Regulator BCRDM_a066_WindowRegulator
• BCRDM_a067 — Obstacle Detected BCRDM_a067_ObstacleDetected
• BCRDM_a068 — Pinch Detected BCRDM_a068_PinchDetected
• BCRDM_a069 — Falcon External Switch BCRDM_a069_FalconExternalSwitch
• BCRDM_a070 — Proactive Sensors BCRDM_a070_ProactiveSensors
• BCRDM_a071 — Reactive Sensors BCRDM_a071_ReactiveSensors
• BCRDM_a072 — Latch Upper Front BCRDM_a072_LatchUpperFront
• BCRDM_a073 — Latch Upper Rear BCRDM_a073_LatchUpperRear
• BCRDM_a074 — Falcon Shutface Switch BCRDM_a074_FalconShutfaceSwitch
• BCRDM_a075 — Locked Door Opened BCRDM_a075_LockedDoorOpened
• BCRDM_a076 — Locked Window Opened BCRDM_a076_LockedWindowOpened
• BCRDM_a077 — Latch Release Failure BCRDM_a077_LatchReleaseFailure This alert may be caused by ice/water ingress into the latch mechanism. The failure may go away after the vehicle has spent some time in a warm environment.
• BCRDM_a078 — Window Comm Error BCRDM_a078_WindowCommError
• BCRDM_a079 — Dvr Side Cfg Mismatch BCRDM_a079_DvrSideCfgMismatch reseting the controller should fix the issue
• BCRDM_a080 — Window Switch LED BCRDM_a080_WindowSwitchLED
• BCRDM_a081 — Ambient Illumination BCRDM_a081_AmbientIllumination
• BCRDM_a082 — Shutface Switch LED BCRDM_a082_ShutfaceSwitchLED
• BCRDM_a083 — Reflector Lamp BCRDM_a083_ReflectorLamp
• BCRDM_a084 — Drv Side Button Stuck BCRDM_a084_DrvSideButtonStuck
• BCRDM_a085 — Pass Side Button Stuck BCRDM_a085_PassSideButtonStuck
• BCRDM_a086 — Door Config Error BCRDM_a086_DoorConfigError Check if DOOR_READ_EN is enabled (pulled low) at startup; check that the doorID pins are being set low in correspondence with the desired side; run UDS routine 204 on the bootloader to read and store the side config