Skip to content

VCBATT_a294 — Left Side Repeater Light Fault

Full alert identifier: VCBATT_a294_leftSideRepeaterLightFault

Alert description

The vehicle controller detects a condition affecting the left side repeater light.

Potential impact

When the left turn indicator is on, the left side repeater light may blink at double the normal speed, may not produce light, and/or may not function as expected.

Set condition

The vehicle controller detects that the left side repeater light high side driver (HSD) reports one of the following: (1) a current draw below the minimum threshold (open circuit); (2) a current draw above the maximum threshold (short circuit).

Clear condition

The vehicle controller detects that the left side repeater light high side driver (HSD) reports a current draw between the minimum and maximum expected thresholds while the light is turned on.

Signals to check

These diagnostic fields are associated with VCBATT_a294. Check the alert's Payload in Service Mode Plus for available values.

Signal Unit
Current Sense Faulted VCBATT_a294_currentSenseFaulted —
Output Faulted VCBATT_a294_outputFaulted —
Over Current VCBATT_a294_overCurrent —
Over Temperature VCBATT_a294_overTemperature —
Temp Sense Faulted VCBATT_a294_tempSenseFaulted —
Under Current VCBATT_a294_underCurrent —

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of VCBATT_a294.

Browse all VCBATT alert codes