PM_a086 — Exception Info6

Full alert identifier: PM_a086_exceptionInfo6

Alert description

The Pedal Monitor (PM) detects an unintended processor reset. This alert is intended for logging purposes and does not on its own indicate a symptom or root cause.

Potential impact

This alert is primarily informational and is used for logging purposes.

Set condition

The PM detects a processor exception.

Clear condition

This alert clears automatically.

Signals to check

These diagnostic fields are associated with PM_a086. Check the alert's Payload in Service Mode Plus for available values.

Signal	Unit
Callstack 3 `PM_a086_callstack3`	—
Callstack 4 `PM_a086_callstack4`	—

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of PM_a086.

PM_a080 — Exception Info0 PM_a080_exceptionInfo0 The Pedal Monitor (PM) detects an unintended processor reset. This alert is intended for logging purposes and does not on its own indicate a symptom or root cause.
PM_a081 — Exception Info1 PM_a081_exceptionInfo1 The Pedal Monitor (PM) detects an unintended processor reset. This alert is intended for logging purposes and does not on its own indicate a symptom or root cause.
PM_a082 — Exception Info2 PM_a082_exceptionInfo2 The Pedal Monitor (PM) detects an unintended processor reset. This alert is intended for logging purposes and does not on its own indicate a symptom or root cause.
PM_a083 — Exception Info3 PM_a083_exceptionInfo3 The Pedal Monitor (PM) detects an unintended processor reset. This alert is intended for logging purposes and does not on its own indicate a symptom or root cause.
PM_a084 — Exception Info4 PM_a084_exceptionInfo4 The Pedal Monitor (PM) detects an unintended processor reset. This alert is intended for logging purposes and does not on its own indicate a symptom or root cause.

Browse all PM alert codes