DI_a210 — Vdc Other Controller States

Full alert identifier: DI_a210_vdcOtherControllerStates

Alert description

Drive Inverter Warning: Inputs to stability control have degraded

Potential impact

Traction control and stability control may fault due to this error, requiring greater manual input from the driver.

Set condition

The actuators required for stability control are in degraded states, so stability control is also degraded. Check tractionControlState and espActuatorState to find the specific controller that is degrading stability control. For tractionControlState, check previous DI alerts that point to specific cause of their degredation. For espActuatorState, check for ESP alerts that point to the specific cause of its degredation.

Clear condition

This alert will clear on the drive cycle after the root cause has been corrected.

Signals to check

These diagnostic fields are associated with DI_a210. Check the alert's Payload in Service Mode Plus for available values.

Signal	Unit
Brake Tmp Est State Faulted `DI_a210_brakeTmpEstStateFaulted`	—
Esp Actuator State `DI_a210_espActuatorState` 0 ACTUATOR UNAVAILABLE 1 ACTUATOR DEGRADED 2 ACTUATOR AVAILABLE 3 COMMAND INVALID	—
Ptc State Global `DI_a210_ptcStateGlobal` 0 FAULTED 1 BACKUP 2 ON 3 SNA	—
Secondary Brake Actuator Is Master `DI_a210_secondaryBrakeActuatorIsMaster`	—

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DI_a210.