CP_a164 — Latch Redisengage Requested

Full alert identifier: CP_a164_latchRedisengageRequested

Message shown in the car

Charge handle still detected after unlatch request Use charge port manual release cable if needed

Alert description

The charge port (CP) receives multiple consecutive user requests to disengage the CP latch and still detects a charge cable connected, possibly indicating a condition affecting latch functionality. Using the charge port manual release cable may be required.

Potential impact

Using the charge port manual release cable may be required to remove the charge cable.

Set condition

The CP detects a charge cable connected after receiving multiple consecutive user requests to disengage the CP latch.

Clear condition

The CP detects the charge cable is removed, or 30 seconds elapse.

Signals to check

Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.

Signal	Unit
VC Temp Ambient Filtered `CP_a164_VC_tempAmbientFiltered` 0 SNA	degC
Min Internal Pin Temp `CP_a164_minInternalPinTemp` 255 SNA	C

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of CP_a164.