CP_a068 — Door Sensor Mismatch
Full alert identifier: CP_a068_doorSensorMismatch
Alert description
The charge port (CP) electronic control unit (ECU) detects that the presence sensor and potentiometer readings of the CP door position do not match.
Potential impact
The charge port door may not open when pressed.
Set condition
The CP door position readings from the presence sensor and potentiometer do not match.
Clear condition
The CP door position readings from the presence sensor and potentiometer match.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Door Counts Filtered
CP_
|
% |
Hall Sensor Filtered
CP_
|
V |
Inductive Sensor Filtered
CP_
|
Hz |
| Signal | Unit |
|---|---|
Door Closed
CP_
|
— |
Door Present
CP_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of CP_a068.