BCS2C_a104 — ECU Over Current

Full alert identifier: BCS2C_a104_ECUOverCurrent

Alert description

to do

Potential impact

This information is not available in the alert reference.

Set condition

This information is not available in the alert reference.

Clear condition

This information is not available in the alert reference.

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of BCS2C_a104.

BCS2C_a105 — ECU Debug Mode BCS2C_a105_ECUDebugMode Production vehicle should not have Debug Jumper in place. Remove jumper from ECU.
BCS2C_a141 — Track Motor Low Current BCS2C_a141_trackMotorLowCurrent 3930 Fault - Low Load Current. Senses less than 500mV
BCS2C_a030 — ECU Log Upload Request BCS2C_a030_ECULogUploadRequest Triggers on board diagnostics service to upload log buffer.
BCS2C_a050 — Pitch Motor Over Curr BCS2C_a050_pitchMotorOverCurr Stall detection. Check for obstacle detected, high current readings, or running into pitch ends.
BCS2C_a066 — Latch Motor Over Curr BCS2C_a066_latchMotorOverCurr Latch motor encountered obstruction or end stop not handled by app

Browse all BCS2C alert codes