Model X

BCFDM_a083 — Unexpected Stop

Full alert identifier: BCFDM_a083_UnexpectedStop

Alert description

The door stopped unexpectedly while opening or closing.

Potential impact

Door opening or closing actuation did not complete.

Set condition

The door controller detected a stopping condition while opening or closing. Alert payload data should provide more information on specific condition(s) involved.

Clear condition

The door exits the release state.

Signals to check

Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.

Signal	Unit
Pitch `BCFDM_a083_pitch`	m/s^2
Roll `BCFDM_a083_roll`	m/s^2

Signal	Unit
Door Zeroing Reason `BCFDM_a083_doorZeroingReason` 0 NONE 1 LATCH CINCHED WITHIN SEAL ZONE 2 MULTIPLE CINCHES AWAY FROM SEAL ZONE 3 ENCODER INVALID LATCH CINCHED 4 CLOSED NO CINCH	—
Release Reason `BCFDM_a083_releaseReason`	—
Unexpected Trip Type `BCFDM_a083_unexpectedTripType` 0 NONE 1 CURRENT NEGATIVE 2 CURRENT POSITIVE 3 CURRENT ERROR NEGATIVE 4 CURRENT ERROR POSITIVE 5 CURRENT ERROR RATE NEGATIVE 6 CURRENT ERROR RATE POSITIVE 7 COUNT	—

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of BCFDM_a083.