Skip to content

APP_w263 — Lss Abort

Full alert identifier: APP_w263_lssAbort

Alert description

The Autopilot electronic control unit (ECU) has detected a condition on the vehicle that does not allow Lane Support Systems (LSS) features, like Lane Departure Avoidance (LDA) or Emergency Lane Departure Avoidance (ELDA), to operate.

Potential impact

Lane Support Systems (LSS) features may not be available, or may not function as expected. The vehicle may no longer stay in its lane without assistance from the driver.

Set condition

One or more of the alert log signals is not the expected value for the feature to activate.

Clear condition

This alert will clear and the feature will be available once the condition is no longer present.

Signals to check

Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.

Signal Unit
Lane Width APP_sw263_laneWidth m
Speed APP_sw263_speed m/s
Signal Unit
Blinker Active APP_sw263_blinkerActive —
Construction APP_sw263_construction —
Dtle Above Threshold Ldw APP_sw263_dtleAboveThresholdLdw —
Eac Status Not Ok APP_sw263_eacStatusNotOk —
Elk Conditions Met APP_sw263_elkConditionsMet —
Front Obstacle APP_sw263_frontObstacle —
Lane Too Narrow APP_sw263_laneTooNarrow —
Ldw Conditions Met APP_sw263_ldwConditionsMet —
Show 16 more fields
Signal Unit
Lka Conditions Met APP_sw263_lkaConditionsMet —
Lss Abort Reason APP_sw263_lssAbortReason —
Marker Type APP_sw263_markerType
0
UNKNOWN
1
INVALID
2
EDGE
3
UNMARKED
4
SOLID
5
DOUBLE SOLID
6
DASHED
7
DOTTED
—
Multi Lane APP_sw263_multiLane —
No Collision Imminent APP_sw263_noCollisionImminent —
Not Encroaching APP_sw263_notEncroaching —
Not Stable In Lane APP_sw263_notStableInLane —
Out Of Speed Region APP_sw263_outOfSpeedRegion —
Side APP_sw263_side
0
RIGHT
1
LEFT
—
Side Obstacle APP_sw263_sideObstacle —
Snowy Road APP_sw263_snowyRoad —
Timer Expired APP_sw263_timerExpired —
Torsion Threshold APP_sw263_torsionThreshold —
Turn Indicator On APP_sw263_turnIndicatorOn —
Vdc Active APP_sw263_vdcActive —
Vehicle Mu Low APP_sw263_vehicleMuLow —

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of APP_w263.

Browse all APP alert codes