Fast charging controller alerts
Browse 118 FC alert codes and open an entry for its description and recorded conditions.
FC alert codes
Showing 51–100 of 118
- FC_w179 — CA startup Problem FC_w179_CA_startupProblem
- FC_w180 — CA charging Problem FC_w180_CA_chargingProblem
- FC_w181 — CA v Reg Brownout FC_w181_CA_vRegBrownout
- FC_w182 — CA evse Chr Malfunc FC_w182_CA_evseChrMalfunc The vehicle is unable to CHAdeMO DC fast charge (FC) because the FC electric control unit (ECU) detects an issue with the electric vehicle supply equipment (EVSE).
- FC_w183 — CA evse Bat Incompat FC_w183_CA_evseBatIncompat The vehicle is unable to CHAdeMO DC fast charge because the electric vehicle supply equipment (EVSE) is not compatible.
- FC_w184 — CA evse Bat Malfunc FC_w184_CA_evseBatMalfunc The vehicle is unable to CHAdeMO DC fast charge (FC) because there is an issue affecting the high voltage (HV) battery.
- FC_w185 — CA veh Ready Deasserted FC_w185_CA_vehReadyDeasserted The vehicle is unable to CHAdeMO DC fast charge (FC) because the vehicle is no longer reporting that it is ready to charge.
- FC_w186 — CA fc Cont Open Timeout FC_w186_CA_fcContOpenTimeout The Fast Charge (FC) Electronic Control Unit (ECU) has detected timeout during waiting for vehicle Fast Charge contactor opened.
- FC_w187 — CA evse Con Lock Timeout FC_w187_CA_evseConLockTimeout The Fast Charge (FC) Electronic Control Unit (ECU) has detected timeout during waiting for EVSE connection lock.
- FC_w193 — FC Alert Placeholder FC_w193_FCAlertPlaceholder
- FC_w257 — GB bms Mia FC_w257_GB_bmsMia The vehicle is unable to begin GB (China) DC fast charging because the fast charge (FC) electronic control unit (ECU) detects that the battery management system (BMS) is unavailable (MIA).
- FC_w258 — GB evse Mia FC_w258_GB_evseMia The vehicle is unable to begin GB (China) DC fast charging because the fast charge (FC) electronic control unit (ECU) detects that the electric vehicle supply equipment (EVSE) is unavailable (MIA).
- FC_w259 — GB veh Tx Buf Ovf FC_w259_GB_vehTxBufOvf The Fast Charge (FC) Electronic Control Unit (ECU) has detected a bus heavy condition. Messages sent to the vehicle stay in queue or overflow, interrupting communication with the charging session.
- FC_w260 — GB veh Rx Buf Ovf FC_w260_GB_vehRxBufOvf The Fast Charge (FC) Electronic Control Unit (ECU) has experienced a bus heavy condition. Messages received by the FC ECU stay in queue or overflow, interrupting communication with the charging session.
- FC_w261 — GB evse Tx Buf Ovf FC_w261_GB_evseTxBufOvf The Fast Charge (FC) Electronic Control Unit (ECU) has detected a bus heavy condition when attempting to send messages to Electric Vehicle Supply Equipment (EVSE). Messages sent by the FC ECU stay in queue or overflow, interrupting communi…
- FC_w262 — GB evse Rx Buf Ovf FC_w262_GB_evseRxBufOvf The Fast Charge (FC) Electronic Control Unit (ECU) has experienced a bus heavy condition. Messages sent by the Electric Vehicle Supply Equipment (EVSE) stay in queue or overflow, interrupting communication with the charging session.
- FC_w263 — GB hw Prox Trip FC_w263_GB_hwProxTrip
- FC_w264 — GB timeout CHM FC_w264_GB_timeoutCHM The Fast Charge (FC) Electronic Control Unit (ECU) has detected the GuoBiao (GB) adapter was unable to receive Charger Handshaking Mode (CHM) messages from Electric Vehicle Supply Equipment (EVSE) within 5 seconds. Message timeouts may res…
- FC_w265 — GB bms Incompatible FC_w265_GB_bmsIncompatible The vehicle is unable to begin GB (China) DC fast charging because the battery management system (BMS) reports an incompatible protocol version.
- FC_w266 — GB neg Pin OT FC_w266_GB_negPin_OT The vehicle is unable to GB (China) DC fast charge because the fast charge (FC) electronic control unit (ECU) detects that the negative pin is over the expected temperature.
- FC_w267 — GB pos Pin OT FC_w267_GB_posPin_OT The vehicle is unable to GB (China) DC fast charge because the fast charge (FC) electronic control unit (ECU) detects that the positive pin is over the expected temperature.
- FC_w268 — GB pcb OT FC_w268_GB_pcb_OT The vehicle is unable to begin GB (China) DC fast charging because the printed circuit board assembly (PCBA) is reporting a temperature higher than the expected value.
- FC_w269 — GB timeout CRM FC_w269_GB_timeoutCRM The Fast Charge (FC) Electronic Control Unit (ECU) has detected the GuoBiao (GB) adapter was unable to receive charger recognition (CRM) from Electric Vehicle Supply Equipment (EVSE) within 30 seconds. Message timeouts may result in the ch…
- FC_w270 — GB timeout CML FC_w270_GB_timeoutCML The Fast Charge (FC) Electronic Control Unit (ECU) has detected the GuoBiao (GB) adapter was unable to receive charging maximum output limit (CML) messages from Electric Vehicle Supply Equipment (EVSE) within 5 seconds. Message timeouts ma…
- FC_w271 — GB timeout CRO FC_w271_GB_timeoutCRO The Fast Charge (FC) Electronic Control Unit (ECU) has detected the GuoBiao (GB) adapter was unable to receive charger output readiness state (CRO) messages from Electric Vehicle Supply Equipment (EVSE) within 5 seconds. Message timeouts m…
- FC_w272 — GB neg To Pos Delta Hi FC_w272_GB_negToPosDeltaHi The vehicle is unable to begin GB (China) DC fast charging because the temperature difference (delta) between the positive pin and the negative pin is higher than expected.
- FC_w273 — GB neg To Pos Delta Lo FC_w273_GB_negToPosDeltaLo The vehicle is unable to begin GB (China) DC fast charging because the temperature difference (delta) between the positive pin and the negative pin is lower than expected.
- FC_w274 — GB neg To Pcb Delta Hi FC_w274_GB_negToPcbDeltaHi The vehicle is unable to begin GB (China) DC fast charging because the temperature difference (delta) between the negative pin and the GB printed circuit board assembly (PCBA) is higher than expected.
- FC_w275 — GB pos To Pcb Delta Hi FC_w275_GB_posToPcbDeltaHi The Fast Charge (FC) Electronic Control Unit (ECU) has detected a temperature gap between positive pin and Printed Circuit Board (PCB) above 50deg centigrade, limiting the Direct Current (DC) charge limit to 60A.
- FC_w276 — GB neg To Pcb Delta Lo FC_w276_GB_negToPcbDeltaLo The Fast Charge (FC) Electronic Control Unit (ECU) has detected a temperature gap between negative pin and Printed Circuit Board (PCB) below -40deg centigrade, limiting the Direct Current (DC) charge limit to 60A.
- FC_w277 — GB pos To Pcb Delta Lo FC_w277_GB_posToPcbDeltaLo The Fast Charge (FC) Electronic Control Unit (ECU) has detected a temperature gap between positive pin and Printed Circuit Board (PCB) below -40deg centigrade, limiting the Direct Current (DC) charge limit to 60A.
- FC_w278 — GB timeout CCS FC_w278_GB_timeoutCCS The Fast Charge (FC) Electronic Control Unit (ECU) has detected the GuoBiao (GB) adapter was unable to receive Charger Charging State (CCS) messages from Electric Vehicle Supply Equipment (EVSE) within 5 seconds. Message timeouts may resul…
- FC_w279 — GB evse Over Current FC_w279_GB_evseOverCurrent The vehicle is unable to GB (China) DC fast charge (FC) because the FC electric control unit (ECU) detects an overcurrent event from the electric vehicle supply equipment (EVSE).
- FC_w280 — GB retry Limit Exceeded FC_w280_GB_retryLimitExceeded The Fast Charge (FC) Electronic Control Unit (ECU) has exceeded the limit of retries attempting to handshake with Electric Vehicle Supply Equipment (EVSE).
- FC_w281 — GB evse Out Of Service FC_w281_GB_evseOutOfService The Fast Charge (FC) Electronic Control Unit (ECU) has detected that Electric Vehicle Supply Equipment (EVSE) is out of service.
- FC_w282 — GB neg Temp Hi Fold Bk FC_w282_GB_negTempHiFoldBk The GB (China) DC fast charge (FC) rate is reduced because the FC electronic control unit (ECU) detects that the adapter negative pin temperature is higher than the expected value.
- FC_w283 — GB pos Temp Hi Fold Bk FC_w283_GB_posTempHiFoldBk The maximum GB (China) DC fast charge (FC) rate is reduced because the FC electronic control unit (ECU) detects that the adapter positive pin temperature is higher than the expected value.
- FC_w284 — GB pcb Temp Hi Fold Bk FC_w284_GB_pcbTempHiFoldBk The Fast Charge (FC) Electronic Control Unit (ECU) has detected the temperature at the GuoBiao (GB) adapter Printed Circuit Board (PCB) has exceeded 74deg centigrade, limiting the charge rate.
- FC_w285 — GB prox Disconnected FC_w285_GB_proxDisconnected The vehicle is unable to GB DC fast charge (FC) because the FC electronic control unit (ECU) detects proximity voltage indicating that the charging cable is not connected.
- FC_w286 — GB evse Conn Unlocked FC_w286_GB_evseConnUnlocked The maximum GB (China) DC fast charge (FC) rate is reduced because the FC electronic control unit (ECU) detects that the electric vehicle supply equipment (EVSE) connector latch state is unlocked.
- FC_w287 — GB veh Conn Unlocked FC_w287_GB_vehConnUnlocked The vehicle is unable to GB (China) DC fast charge (FC) because the FC electronic control unit (ECU) detects that the vehicle connector latch state is unlocked.
- FC_w288 — GB evse Abnormal Stop Req FC_w288_GB_evseAbnormalStopReq The Fast Charge (FC) Electronic Control Unit (ECU) has received a stop charge request from the GuoBiao (GB) adapter due to an abnormal condition with the Electric Vehicle Supply Equipment (EVSE).
- FC_w289 — GB prox Timeout FC_w289_GB_proxTimeout The Fast Charge (FC) Electronic Control Unit (ECU) has detected a timeout condition after the GuoBiao (GB) Adapter proximity status did not report as latched for 3 seconds after power on.
- FC_w290 — GB pilot Accept Timeout FC_w290_GB_pilotAcceptTimeout The Fast Charge (FC) Electronic Control Unit (ECU) has detected a handshake request from the GuoBiao (GB) adapter but the request was not accepted.
- FC_w291 — GB veh Data Timeout FC_w291_GB_vehDataTimeout The Fast Charge (FC) Electronic Control Unit (ECU) has detected the vehicle was unable to send handshake parameters to the GuoBiao (GB) adapter within 3 seconds. Handshake timeouts may result in the charging session not starting.
- FC_w292 — GB veh Con Lock Timeout FC_w292_GB_vehConLockTimeout The Fast Charge (FC) Electronic Control Unit (ECU) has detected the charge port latch did not engage within 3 seconds.
- FC_w293 — GB prox Rationality FC_w293_GB_proxRationality The Fast Charge (FC) Electronic Control Unit (ECU) has received a message from the GuoBiao (GB) adapter detecting irrational status between adapter and vehicle charge port via proximity signal.
- FC_w294 — GB unused FC_w294_GB_unused
- FC_w295 — GB pilot Rationality FC_w295_GB_pilotRationality The Fast Charge (FC) Electronic Control Unit (ECU) has received a message from the GuoBiao (GB) adapter detecting irrational status between adapter and vehicle charge port via pilot signal.
- FC_w296 — GB invalid Pilot Transitio FC_w296_GB_invalidPilotTransitio The Fast Charge (FC) Electronic Control Unit (ECU) has received a message from the GuoBiao (GB) adapter detecting the state transition of pilot signal is different from normal transition sequence.