Drive inverter (slave) alerts
Browse 409 DIS alert codes and open an entry for its description and recorded conditions.
DIS alert codes
Showing 201–250 of 409
- DIS_u009 — Regen Off Override DIS_u009_regenOffOverride Drive Inverter Slave User Alert: Regen off is overridden
- DIS_u010 — Unused010 DIS_u010_unused010 Drive Inverter Slave User Alert: Unused
- DIS_u011 — Drive Rail Not Requested DIS_u011_driveRailNotRequested Drive Inverter User Alert: Drive rail not requested
- DIS_u012 — Accel Pressed In NP DIS_u012_accelPressedInNP Drive Inverter User Alert: Shift into D or R to Drive
- DIS_u013 — Both Pedals Pressed DIS_u013_bothPedalsPressed Drive Inverter Slave User Alert: Both accelerator and brake pedals pressed
- DIS_u014 — Not Ok To Start Drive DIS_u014_notOkToStartDrive Drive Inverter Slave User Alert: 12V supply not sufficient for drive
- DIS_u015 — Crs Not Available DIS_u015_crsNotAvailable
- DIS_u016 — EB Rreleased DIS_u016_EBRreleased
- DIS_u017 — Tire Fitment Changed DIS_u017_tireFitmentChanged Drive Inverter Slave User Alert: Tire fitment change detected
- DIS_u018 — Crs Front Camera Blind DIS_u018_crsFrontCameraBlind Drive Inverter Slave User Alert: Cruise unavailable due to front camera visibility
- DIS_u019 — Crs Front Radar Blind DIS_u019_crsFrontRadarBlind Drive Inverter Slave User Alert: Cruise unavailable due to front radar visibility
- DIS_u020 — Crs Seatbelt Unbuckled DIS_u020_crsSeatbeltUnbuckled Drive Inverter Slave User Alert: Cruise unavailable due to unbuckled seatbelt
- DIS_u021 — Rear Motor Mode DIS_u021_rearMotorMode Drive Inverter Slave User Alert: Rear Motor Mode selected by user
- DIS_u022 — Front Motor Mode DIS_u022_frontMotorMode Drive Inverter Slave User Alert: Front Motor Mode selected by user
- DIS_u023 — Hold Release Rqrd DIS_u023_holdReleaseRqrd Drive Inverter Slave User Alert: Vehicle Hold release required
- DIS_u026 — Brake Stand DIS_u026_brakeStand Drive Inverter Slave User Alert: Brake stand active
- DIS_u027 — Pedal Misapplication DIS_u027_pedalMisapplication Drive Inverter Slave User Alert: Obstacle detected, torque reduced
- DIS_w001 — Hw Phase Agate Drive DIS_w001_hwPhaseAgateDrive Drive Inverter Slave Warning: Phase A gate driver
- DIS_w002 — Hw Phase Bgate Drive DIS_w002_hwPhaseBgateDrive Drive Inverter Slave Warning: Phase B gate driver
- DIS_w003 — Hw Phase Cgate Drive DIS_w003_hwPhaseCgateDrive Drive Inverter Slave Warning: Phase C gate driver
- DIS_w004 — Hw Phase Apeak DIS_w004_hwPhaseApeak Drive Inverter Slave Warning: Phase A peak over current detected in hardware
- DIS_w005 — Hw Phase Bpeak DIS_w005_hwPhaseBpeak Drive Inverter Slave Warning: Phase B peak over current detected in hardware
- DIS_w006 — Hw Phase Cpeak DIS_w006_hwPhaseCpeak Drive Inverter Slave Warning: Phase C peak over current detected in hardware
- DIS_w007 — Hw Hvil Not Present DIS_w007_hwHvilNotPresent Drive Inverter Slave Warning: HVIL Not Present
- DIS_w008 — Hw Encoder A DIS_w008_hwEncoderA Drive Inverter Slave Warning: Track A Disconnected
- DIS_w009 — Hw Encoder B DIS_w009_hwEncoderB Drive Inverter Slave Warning: Track B disconnected
- DIS_w010 — Hw Pedal Monitor Reset DIS_w010_hwPedalMonitorReset Drive Inverter Slave Warning: Pedal Monitor Reset
- DIS_w011 — Sw Power Stage Not Ready DIS_w011_swPowerStageNotReady Drive Inverter Slave Warning: Power Stage Not Ready
- DIS_w012 — Accel5 V Supply DIS_w012_accel5VSupply Drive Inverter Slave Warning: Accel 5V Supply out of bounds
- DIS_w013 — Power Pcb Sensor DIS_w013_powerPcbSensor Drive Inverter Slave Warning: Power PCB temperature sensor irrational
- DIS_w014 — Active Damping DIS_w014_activeDamping Drive Inverter Slave Warning: Active damping error
- DIS_w015 — Immobilizer DIS_w015_immobilizer Drive Inverter Slave Warning: Immobilizer error
- DIS_w016 — Safe State Applied DIS_w016_safeStateApplied Drive Inverter Slave Warning: Power stage applied a safe state
- DIS_w017 — Hw Pedal Monitor DIS_w017_hwPedalMonitor Drive Inverter Slave Warning: Pedal Monitor shutdown
- DIS_w018 — Hw LV Supply UV DIS_w018_hwLVSupplyUV Drive Inverter Slave Warning: The drive inverter slave (DIS) electronic control unit (ECU) detects a low voltage (LV) battery undervoltage event.
- DIS_w019 — Hw Accel Pedal Power DIS_w019_hwAccelPedalPower Drive Inverter Slave Warning: Accel pedal power undervoltage
- DIS_w020 — Hw Motor Encoder DIS_w020_hwMotorEncoder Drive Inverter Slave Warning: Motor encoder error detected in hardware
- DIS_w021 — Hw Bus OV DIS_w021_hwBusOV Drive Inverter Slave Warning: Battery over voltage detected in hardware
- DIS_w022 — Hw5v Supply UV DIS_w022_hw5vSupplyUV Drive Inverter Slave Warning: 5V supply under voltage
- DIS_w023 — Car Not Parked DIS_w023_carNotParked Drive Inverter Slave Warning: Unused software alert 23
- DIS_w024 — Self Test DIS_w024_selfTest Drive Inverter Slave Warning: Self Start-up Test Failed
- DIS_w025 — Phase Apeak DIS_w025_phaseApeak Drive Inverter Slave Warning: Phase A peak over current detected in software
- DIS_w026 — Phase Bpeak DIS_w026_phaseBpeak Drive Inverter Slave Warning: Phase B peak over current detected in software
- DIS_w027 — Phase Cpeak DIS_w027_phaseCpeak Drive Inverter Slave Warning: Phase C peak over current detected in software
- DIS_w028 — Phase Arms DIS_w028_phaseArms Drive Inverter Slave Warning: Phase B rms over current
- DIS_w029 — Phase Brms DIS_w029_phaseBrms Drive Inverter Slave Warning: Phase C rms over current
- DIS_w030 — Phase Crms DIS_w030_phaseCrms Drive Inverter Slave Warning: Phase C rms over current
- DIS_w031 — Phase Acurrent Offset DIS_w031_phaseAcurrentOffset Drive Inverter Slave Warning: Phase A current offset too big
- DIS_w032 — Phase Bcurrent Offset DIS_w032_phaseBcurrentOffset Drive Inverter Slave Warning: Phase B current offset too big
- DIS_w033 — Phase Acurrent Sensor DIS_w033_phaseAcurrentSensor Drive Inverter Slave Warning: Phase A current sensor bad