Drive inverter (slave) alerts
Browse 409 DIS alert codes and open an entry for its description and recorded conditions.
DIS alert codes
Showing 1–50 of 409
- DIS_f001 — Hw Phase Agate Drive DIS_f001_hwPhaseAgateDrive Drive Inverter Slave Fault: Phase A gate driver
- DIS_f002 — Hw Phase Bgate Drive DIS_f002_hwPhaseBgateDrive Drive Inverter Slave Fault: Phase B gate driver
- DIS_f003 — Hw Phase Cgate Drive DIS_f003_hwPhaseCgateDrive Drive Inverter Slave Fault: Phase C gate driver
- DIS_f004 — Hw Phase Apeak DIS_f004_hwPhaseApeak Drive Inverter Slave Fault: Phase A peak over current detected in hardware
- DIS_f005 — Hw Phase Bpeak DIS_f005_hwPhaseBpeak Drive Inverter Slave Fault: Phase B peak over current detected in hardware
- DIS_f006 — Hw Phase Cpeak DIS_f006_hwPhaseCpeak Drive Inverter Slave Fault: Phase C peak over current detected in hardware
- DIS_f007 — Hw Hvil Not Present DIS_f007_hwHvilNotPresent Drive Inverter Slave Fault: HVIL Not Present
- DIS_f008 — Hw Encoder A DIS_f008_hwEncoderA Drive Inverter Slave Fault: Track A Disconnected
- DIS_f009 — Hw Encoder B DIS_f009_hwEncoderB Drive Inverter Slave Fault: Track B disconnected
- DIS_f010 — Hw Pedal Monitor Reset DIS_f010_hwPedalMonitorReset Drive Inverter Slave Fault: Pedal Monitor Reset
- DIS_f011 — Sw Power Stage Not Ready DIS_f011_swPowerStageNotReady Drive Inverter Slave Fault: Power Stage Not Ready
- DIS_f012 — Accel5 V Supply DIS_f012_accel5VSupply Drive Inverter Slave Fault: Accel 5V Supply out of bounds
- DIS_f013 — Power Pcb Sensor DIS_f013_powerPcbSensor Drive Inverter Slave Fault: Power PCB temperature sensor irrational
- DIS_f014 — Active Damping DIS_f014_activeDamping Drive Inverter Slave Fault: Active damping error
- DIS_f015 — Immobilizer DIS_f015_immobilizer Drive Inverter Slave Fault: Immobilizer error
- DIS_f016 — Safe State Applied DIS_f016_safeStateApplied Drive Inverter Slave Fault: Power stage applied a safe state
- DIS_f017 — Hw Pedal Monitor DIS_f017_hwPedalMonitor Drive Inverter Slave Fault: Pedal Monitor shutdown
- DIS_f018 — Hw LV Supply UV DIS_f018_hwLVSupplyUV Drive Inverter Slave Fault: The drive inverter slave (DIS) electronic control unit (ECU) detects a low voltage (LV) battery undervoltage event.
- DIS_f019 — Hw Accel Pedal Power DIS_f019_hwAccelPedalPower Drive Inverter Slave Fault: Accel pedal power undervoltage
- DIS_f020 — Hw Motor Encoder DIS_f020_hwMotorEncoder Drive Inverter Slave Fault: Motor encoder error detected in hardware
- DIS_f021 — Hw Bus OV DIS_f021_hwBusOV Drive Inverter Slave Fault: Battery over voltage detected in hardware
- DIS_f022 — Hw5v Supply UV DIS_f022_hw5vSupplyUV Drive Inverter Slave Fault: 5V supply under voltage
- DIS_f023 — Car Not Parked DIS_f023_carNotParked Drive Inverter Slave Fault: Unused software alert 23
- DIS_f024 — Self Test DIS_f024_selfTest Drive Inverter Slave Fault: Self Start-up Test Failed
- DIS_f025 — Phase Apeak DIS_f025_phaseApeak Drive Inverter Slave Fault: Phase A peak over current detected in software
- DIS_f026 — Phase Bpeak DIS_f026_phaseBpeak Drive Inverter Slave Fault: Phase B peak over current detected in software
- DIS_f027 — Phase Cpeak DIS_f027_phaseCpeak Drive Inverter Slave Fault: Phase C peak over current detected in software
- DIS_f028 — Phase Arms DIS_f028_phaseArms Drive Inverter Slave Fault: Phase B rms over current
- DIS_f029 — Phase Brms DIS_f029_phaseBrms Drive Inverter Slave Fault: Phase C rms over current
- DIS_f030 — Phase Crms DIS_f030_phaseCrms Drive Inverter Slave Fault: Phase C rms over current
- DIS_f031 — Phase Acurrent Offset DIS_f031_phaseAcurrentOffset Drive Inverter Slave Fault: Phase A current offset too big
- DIS_f032 — Phase Bcurrent Offset DIS_f032_phaseBcurrentOffset Drive Inverter Slave Fault: Phase B current offset too big
- DIS_f033 — Phase Acurrent Sensor DIS_f033_phaseAcurrentSensor Drive Inverter Slave Fault: Phase A current sensor bad
- DIS_f034 — Phase Bcurrent Sensor DIS_f034_phaseBcurrentSensor Drive Inverter Slave Fault: Phase B current sensor bad
- DIS_f035 — Phase Current Balance DIS_f035_phaseCurrentBalance Drive Inverter Slave Fault: Phase current imbalance
- DIS_f036 — Bus OV DIS_f036_busOV Drive Inverter Slave Fault: Battery over voltage detected in software
- DIS_f037 — Bus UV DIS_f037_busUV Drive Inverter Slave Fault: Battery under voltage
- DIS_f038 — Bus Vsensor DIS_f038_busVsensor Drive Inverter Slave Fault: Battery sensor bad
- DIS_f039 — Regen Limited DIS_f039_regenLimited Drive Inverter Slave Fault: Regen limited significantly or disabled
- DIS_f040 — Dis MIA DIS_f040_disMIA Drive Inverter Slave Fault: DIS CAN node MIA
- DIS_f041 — Unintended Reset DIS_f041_unintendedReset Drive Inverter Slave Fault: Reset for unintended reason, e.g. from watchdog timeout
- DIS_f042 — Inlet Sensor DIS_f042_inletSensor Drive Inverter Slave Fault: Inlet sensor bad
- DIS_f043 — Outlet OT DIS_f043_outletOT Drive Inverter Slave Fault: Outlet over temperature
- DIS_f044 — Outlet UT DIS_f044_outletUT Drive Inverter Slave Fault: Outlet under temperature
- DIS_f045 — Outlet Sensor DIS_f045_outletSensor Drive Inverter Slave Fault: Outlet sensor bad
- DIS_f046 — Stator OT DIS_f046_statorOT Drive Inverter Slave Fault: Stator over temperature
- DIS_f047 — Stator Sensor1 DIS_f047_statorSensor1 Drive Inverter Slave Fault: Stator sensor 1 bad
- DIS_f048 — Stator Sensor2 DIS_f048_statorSensor2 Drive Inverter Slave Fault: Stator sensor 2 bad
- DIS_f049 — Stator Sensor Diff DIS_f049_statorSensorDiff Drive Inverter Slave Fault: Stator sensor difference
- DIS_f050 — No Stator Sensor DIS_f050_noStatorSensor Drive Inverter Slave Fault: No Stator sensor available