Drive inverter alerts
Browse 447 DI alert codes and open an entry for its description and recorded conditions.
DI alert codes
Showing 1–50 of 447
- DI_d001 — Replace Drive Unit DI_d001_replaceDriveUnit
- DI_d002 — Lv Supply OV DI_d002_lvSupplyOV
- DI_d003 — Lv Supply UV DI_d003_lvSupplyUV
- DI_d004 — Over Temp DI_d004_overTemp
- DI_d005 — Low Flow DI_d005_lowFlow
- DI_d006 — Proximity Line DI_d006_proximityLine
- DI_d007 — Bus UV DI_d007_busUV
- DI_d008 — Motor Encoder DI_d008_motorEncoder
- DI_d009 — Brake Pedal DI_d009_brakePedal
- DI_d010 — Accel Pedal DI_d010_accelPedal
- DI_d011 — Unused11 DI_d011_unused11
- DI_d012 — Unused12 DI_d012_unused12
- DI_d013 — Unused13 DI_d013_unused13
- DI_d014 — Unused14 DI_d014_unused14
- DI_d015 — Unused15 DI_d015_unused15
- DI_d016 — Unused16 DI_d016_unused16
- DI_d017 — Unused17 DI_d017_unused17
- DI_d018 — Unused18 DI_d018_unused18
- DI_d019 — Unused19 DI_d019_unused19
- DI_d020 — Unused20 DI_d020_unused20
- DI_d021 — Unused21 DI_d021_unused21
- DI_d022 — Unused22 DI_d022_unused22
- DI_d023 — Unused23 DI_d023_unused23
- DI_d024 — Unused24 DI_d024_unused24
- DI_d025 — Unused25 DI_d025_unused25
- DI_d026 — Unused26 DI_d026_unused26
- DI_d027 — Unused27 DI_d027_unused27
- DI_d028 — Unused28 DI_d028_unused28
- DI_f001 — Hw Phase Agate Drive DI_f001_hwPhaseAgateDrive Drive Inverter Fault: Phase A gate driver
- DI_f002 — Hw Phase Bgate Drive DI_f002_hwPhaseBgateDrive Drive Inverter Fault: Phase B gate driver
- DI_f003 — Hw Phase Cgate Drive DI_f003_hwPhaseCgateDrive Drive Inverter Fault: Phase C gate driver
- DI_f004 — Hw Phase Apeak DI_f004_hwPhaseApeak Drive Inverter Fault: Phase A peak over current detected in hardware
- DI_f005 — Hw Phase Bpeak DI_f005_hwPhaseBpeak Drive Inverter Fault: Phase B peak over current detected in hardware
- DI_f006 — Hw Phase Cpeak DI_f006_hwPhaseCpeak Drive Inverter Fault: Phase C peak over current detected in hardware
- DI_f007 — Hw Hvil Not Present DI_f007_hwHvilNotPresent Drive Inverter Fault: HVIL Not Present
- DI_f008 — Hw Encoder A DI_f008_hwEncoderA Drive Inverter Fault: Track A Disconnected
- DI_f009 — Hw Encoder B DI_f009_hwEncoderB Drive Inverter Fault: Track B disconnected
- DI_f010 — Hw Pedal Monitor Reset DI_f010_hwPedalMonitorReset Drive Inverter Fault: Pedal Monitor Reset
- DI_f011 — Sw Power Stage Not Ready DI_f011_swPowerStageNotReady Drive Inverter Fault: Power Stage Not Ready
- DI_f012 — Accel5 V Supply DI_f012_accel5VSupply Drive Inverter Fault: Accel 5V Supply out of bounds
- DI_f013 — Power Pcb Sensor DI_f013_powerPcbSensor Drive Inverter Fault: Power PCB temperature sensor irrational
- DI_f014 — Active Damping DI_f014_activeDamping Drive Inverter Fault: Active damping error
- DI_f015 — Immobilizer DI_f015_immobilizer Drive Inverter Fault: Immobilizer error
- DI_f016 — Safe State Applied DI_f016_safeStateApplied Drive Inverter Fault: Power stage applied a safe state
- DI_f017 — Hw Pedal Monitor DI_f017_hwPedalMonitor Drive Inverter Fault: Pedal Monitor shutdown
- DI_f018 — Hw LV Supply UV DI_f018_hwLVSupplyUV Drive Inverter Fault: The drive inverter (DI) electronic control unit (ECU) detects a low voltage (LV) battery undervoltage event.
- DI_f019 — Hw Accel Pedal Power DI_f019_hwAccelPedalPower Drive Inverter Fault: Accel pedal power undervoltage
- DI_f020 — Hw Motor Encoder DI_f020_hwMotorEncoder Drive Inverter Fault: Motor encoder error detected in hardware
- DI_f021 — Hw Bus OV DI_f021_hwBusOV Drive Inverter Fault: Battery over voltage detected in hardware
- DI_f022 — Hw5v Supply UV DI_f022_hw5vSupplyUV Drive Inverter Fault: 5V supply under voltage