Vehicle controller alerts
Browse 34 VCBATT0 alert codes and open an entry for its description and recorded conditions.
VCBATT0 alert codes
Showing 1–34 of 34
- VCBATT0_a001 — Watchdog Reset VCBATT0_a001_WatchdogReset Warns if the processor has experienced a reset due to watchdog reset.
- VCBATT0_a002 — Power Loss Reset VCBATT0_a002_PowerLossReset Warns if the processor has experienced a reset due to power loss.
- VCBATT0_a003 — SW Assertion VCBATT0_a003_SWAssertion An internal software assertion has failed.
- VCBATT0_a005 — CANTX Error VCBATT0_a005_CANTXError An error has been detected with CAN transmission. Used by engineering to debug.
- VCBATT0_a006 — CANTX cyclic Error VCBATT0_a006_CANTX_cyclicError An error has been detected within the CANTX cyclic dispatcher generated code. Used by engineering to debug.
- VCBATT0_a012 — CPU Reset VCBATT0_a012_CPUReset CPU detected a reset.
- VCBATT0_a013 — Alert Manager Fault VCBATT0_a013_AlertManagerFault Alert Manager encountered an internal processing error.
- VCBATT0_a015 — NVMM Error VCBATT0_a015_NVMMError An issue is indicated from the non-volatile memory manager.
- VCBATT0_a016 — NVMM Record Error VCBATT0_a016_NVMMRecordError An issue is indicated from a particular non-volatile memory record.
- VCBATT0_a021 — Task Scheduler Error VCBATT0_a021_TaskSchedulerError If a task was not able to run at the appropriate time.
- VCBATT0_a022 — Task Init Error VCBATT0_a022_TaskInitError If a task failed to initialize.
- VCBATT0_a029 — Core Dump VCBATT0_a029_CoreDump Indicates an exception occurred and core dump data is present.
- VCBATT0_a030 — ECU Log Upload Request VCBATT0_a030_ECULogUploadRequest Triggers on board diagnostics service to upload log buffer.
- VCBATT0_a031 — UDS Active VCBATT0_a031_UDSActive A unified diagnostics services (UDS) request was made
- VCBATT0_a032 — Ipc Watchdog Expired VCBATT0_a032_ipcWatchdogExpired Indicates at least one microcontroller core is unresponsive.
- VCBATT0_a033 — Ecc Non Correctable Error VCBATT0_a033_eccNonCorrectableError Indicates a non-correctable ECC error has occurred.
- VCBATT0_a038 — Prot Fault Info VCBATT0_a038_ProtFaultInfo Indicates there was an SMPU or PPU fault reported on the ECU.
- VCBATT0_a039 — Prot Fault Address VCBATT0_a039_ProtFaultAddress Indicates there was an SMPU or PPU fault reported on the ECU.
- VCBATT0_a040 — Backtrace VCBATT0_a040_Backtrace Indicates information about the state of the CPU when an exception was hit.
- VCBATT0_a041 — High CPU Load VCBATT0_a041_HighCPULoad CPU under heavy load.
- VCBATT0_a042 — High Stack Usage VCBATT0_a042_HighStackUsage High stack memory usage was detected
- VCBATT0_a043 — Task1ms Error VCBATT0_a043_Task1msError Debug information for 1ms task errors.
- VCBATT0_a044 — Task10ms Error VCBATT0_a044_Task10msError Debug information for 10ms task errors
- VCBATT0_a045 — Task100ms Error VCBATT0_a045_Task100msError Debug information for 100ms task errors.
- VCBATT0_a046 — Task1000ms Error VCBATT0_a046_Task1000msError Debug information for 1000ms task errors.
- VCBATT0_a047 — Reset Reason VCBATT0_a047_resetReason Logs reset reason on bootup or single core reset.
- VCBATT0_a058 — Input R High Sync Debug VCBATT0_a058_inputRHighSyncDebug Voltage drop on input power is high
- VCBATT0_a059 — Input Resistance High VCBATT0_a059_inputResistanceHigh A large voltage drop is detected in the input power to the vehicle controller, indicating the resistance on the input power feed to the vehicle controller is higher than expected.
- VCBATT0_a060 — Engineering Build VCBATT0_a060_engineeringBuild The software installed on the vehicle is intended for engineering use and development purposes only. The vehicle software may have some expected features disabled for testing purposes, or include new features whose function is not yet full…
- VCBATT0_a061 — X CP Connected VCBATT0_a061_XCPConnected Indicates an active connection to the universal measurement and calibration protocol state machine
- VCBATT0_a062 — X CP Was Connected VCBATT0_a062_XCPWasConnected Indicates there was an active connection to the universal measurement and calibration protocol state machine
- VCBATT0_a063 — Switch Fault VCBATT0_a063_SwitchFault A condition affecting switch functionality has been detected.
- VCBATT0_a064 — Bus Sleep Req Timeout VCBATT0_a064_busSleepReqTimeout Indicates if a bus has timed out of a sleep request from the network manager
- VCBATT0_a423 — Rtos Sleep Failed VCBATT0_a423_rtosSleepFailed Indicates microcontroller core did not enter its low power mode.