Park assist alerts
Browse 87 PARK alert codes and open an entry for its description and recorded conditions.
PARK alert codes
Showing 51–87 of 87
- PARK_a051 — S11 over Temp PARK_a051_s11_overTemp Sensor overheated.
- PARK_a052 — S11 internal Fail PARK_a052_s11_internalFail Sensor internal failure occured - like sensor damping resistor error or broken or disconnected membrane error, self diagnosis error or sensor reset or sensor resonator drift
- PARK_a053 — S11 lin Comm Error PARK_a053_s11_linCommError This error is detected by the ECU. Sensor short to GND or short to plus or broken sensor line and all LIN errors
- PARK_a054 — S11 blocked PARK_a054_s11_blocked This error is detected by the ECU. Sensor dirt can be detected through any or all of these methods 1. high attenuation time 2. constant echos when vehicle is in motion . 3. low attenuation time 4. jittering attenuation time.
- PARK_a055 — S11 cross Talk PARK_a055_s11_crossTalk Adjacent sensor noise detected.
- PARK_a056 — S12 over Temp PARK_a056_s12_overTemp Sensor overheated.
- PARK_a057 — S12 internal Fail PARK_a057_s12_internalFail Sensor internal failure occured - like sensor damping resistor error or broken or disconnected membrane error, self diagnosis error or sensor reset or sensor resonator drift
- PARK_a058 — S12 lin Comm Error PARK_a058_s12_linCommError This error is detected by the ECU. Sensor short to GND or short to plus or broken sensor line and all LIN errors
- PARK_a059 — S12 blocked PARK_a059_s12_blocked This error is detected by the ECU. Sensor dirt can be detected through any or all of these methods 1. high attenuation time 2. constant echos when vehicle is in motion . 3. low attenuation time 4. jittering attenuation time.
- PARK_a060 — S12 cross Talk PARK_a060_s12_crossTalk Adjacent sensor noise detected.
- PARK_a061 — Ecu Under Voltage PARK_a061_ecuUnderVoltage Undervoltage detected by the ECU
- PARK_a062 — Ecu Over Voltage PARK_a062_ecuOverVoltage Overvoltage detected by the ECU < DO NOT TRUST >
- PARK_a063 — Sensor Voltage PARK_a063_sensorVoltage Sensor supply voltage outside of specificaiton
- PARK_a064 — Ecu Fault PARK_a064_ecuFault RAM/ROM failure on startup, NVM corruption and ECC failure. (ECC Failure DTC, memory failures, checksum failure for appication)
- PARK_a065 — Crc Fault PARK_a065_crcFault CRC of the calibration block in D-Flash mismatched.
- PARK_a066 — Calibration Missing PARK_a066_calibrationMissing The calibration block in D-Flash is missing or not available
- PARK_a067 — Private CAN Bus Off PARK_a067_privateCANBusOff The secondary controller area network (CAN) bus is in the busoff state.
- PARK_a068 — Hardware Watch Dog PARK_a068_hardwareWatchDog HW watchdog tripped.
- PARK_a069 — Das Mia PARK_a069_dasMia Expected messages from DAS/APP missing.
- PARK_a070 — Sccm Mia PARK_a070_sccmMia Expected messages from SCCM missing.
- PARK_a071 — Di Mia PARK_a071_diMia Expected messages from DI missing.
- PARK_a072 — Epas Mia PARK_a072_epasMia Expected messages from EPAS missing.
- PARK_a073 — Epb Mia PARK_a073_epbMia Expected messages from EPB missing.
- PARK_a074 — Esp Mia PARK_a074_espMia Expected messages from ESP missing.
- PARK_a075 — Rcm Mia PARK_a075_rcmMia Expected messages from RCM missing.
- PARK_a076 — Vc Front Mia PARK_a076_vcFrontMia Expected messages from VCFRONT missing.
- PARK_a077 — Das Error PARK_a077_dasError Invalid communication from DAS/APP
- PARK_a078 — Di Error PARK_a078_diError Invalid communication from DI
- PARK_a079 — Epas Error PARK_a079_epasError Invalid communication from EPAS
- PARK_a080 — Epb Error PARK_a080_epbError Invalid communication from EPB
- PARK_a081 — Esp Error PARK_a081_espError Invalid communication from ESP
- PARK_a082 — Rcm Error PARK_a082_rcmError Invalid communication from RCM
- PARK_a083 — Vc Front Error PARK_a083_vcFrontError Invalid communication from VCFRONT
- PARK_a084 — Sccm Error PARK_a084_sccmError Invalid communication from SCCM
- PARK_a085 — Watchdog Reset PARK_a085_watchdogReset ECU recovered from a SW watchdog reset.
- PARK_a086 — Nvm Fault PARK_a086_nvmFault Failed to read or write NVRAM.
- PARK_a087 — Sensor Mismatch Error PARK_a087_sensorMismatchError Indicates the type of each ultrasonic sensor (Valeo HP or HPFL) on a vehicle when a mismatch is present.