Electronic stability program alerts
Browse 409 ESP alert codes and open an entry for its description and recorded conditions.
ESP alert codes
Showing 51–100 of 409
- ESP_a051 — Fr RWSS Supply Short To Gnd ESP_a051_FrRWSSSupplyShortToGnd Right Front Wheel Speed Sensor Supply Line Short to Gnd
- ESP_a052 — Fr RWSS General Fault ESP_a052_FrRWSSGeneralFault Right Front Wheel Speed Sensor Generic Fault.
- ESP_a053 — Re LWSS Open Or Short To Gnd ESP_a053_ReLWSSOpenOrShortToGnd Short circuit of the WSS_RL sensor line to GND or line interruption (sensor or supply line).
- ESP_a054 — Re LWSS Short To12 V ESP_a054_ReLWSSShortTo12V Short circuit of the WSS_RL sensor line to 12V.
- ESP_a055 — Re LWSS Line Interruption ESP_a055_ReLWSSLineInterruption WSS_RL line interruption (sensor or supply line).
- ESP_a056 — Re LWSS Max Speed Exceeded ESP_a056_ReLWSSMaxSpeedExceeded Maximum wheel speed reached. Range monitoring for WSS signal which monitors non-plausible high wheel velocity.
- ESP_a057 — Re LWSS Too Many Pulses ESP_a057_ReLWSSTooManyPulses WSS_RL HET TU buffer noise (enormous amount of edges ocurred).
- ESP_a058 — Re LWSS Lost Signal ESP_a058_ReLWSSLostSignal WSS fault due to missing wheel speed signal.
- ESP_a059 — Re LWSS No Pulses Detected ESP_a059_ReLWSSNoPulsesDetected WSS fault due to missing wheel speed signal.
- ESP_a060 — Re LWSS Wrong Sensor Type ESP_a060_ReLWSSWrongSensorType A wheel speed sensor with wrong sensor type is mounted on wheel rear left.
- ESP_a061 — Re LWSS Signal Noise ESP_a061_ReLWSSSignalNoise Left Rear Wheel Speed Sensor against second signal failed due WSS signal interferences or disturbances.
- ESP_a062 — Re LWSSV Diff Fault ESP_a062_ReLWSSVDiffFault Left Rear Wheel Speed Sensor: Plausibility against second signal failed due to monitoring of wheel speed differences.
- ESP_a063 — Re LWSS Direction Fault ESP_a063_ReLWSSDirectionFault Plausibility fault while monitoring of wheel direction. Check mounting position of rear left wheel speed sensor
- ESP_a064 — Re LWSS Large Air Gap ESP_a064_ReLWSSLargeAirGap Wss fault due to Alignment or adjustment incorrect.
- ESP_a065 — Re LWSS Supply Short To Gnd ESP_a065_ReLWSSSupplyShortToGnd Left Rear Wheel Speed Sensor Supply Line Short to Gnd
- ESP_a066 — Re LWSS General Fault ESP_a066_ReLWSSGeneralFault Left Rear Wheel Speed Sensor Generic Fault.
- ESP_a067 — Re RWSS Open Or Short To Gnd ESP_a067_ReRWSSOpenOrShortToGnd Short circuit of the WSS_RR sensor line to GND or line interruption (sensor or supply line).
- ESP_a068 — Re RWSS Short To12 V ESP_a068_ReRWSSShortTo12V Short circuit of the WSS_RR sensor line to 12V.
- ESP_a069 — Re RWSS Line Interruption ESP_a069_ReRWSSLineInterruption WSS_RR line interruption (sensor or supply line).
- ESP_a070 — Re RWSS Max Speed Exceeded ESP_a070_ReRWSSMaxSpeedExceeded Maximum wheel speed reached. Range monitoring for WSS signal which monitors non-plausible high wheel velocity.
- ESP_a071 — Re RWSS Too Many Pulses ESP_a071_ReRWSSTooManyPulses WSS_RR HET TU buffer noise (enormous amount of edges ocurred).
- ESP_a072 — Re RWSS Lost Signal ESP_a072_ReRWSSLostSignal WSS fault due to missing wheel speed signal.
- ESP_a073 — Re RWSS No Pulses Detected ESP_a073_ReRWSSNoPulsesDetected WSS fault due to missing wheel speed signal.
- ESP_a074 — Re RWSS Wrong Sensor Type ESP_a074_ReRWSSWrongSensorType A wheel speed sensor with wrong sensor type is mounted on wheel rear right.
- ESP_a075 — Re RWSS Signal Noise ESP_a075_ReRWSSSignalNoise Right Rear Wheel Speed Sensor against second signal failed due WSS signal interferences or disturbances.
- ESP_a076 — Re RWSSV Diff Fault ESP_a076_ReRWSSVDiffFault Right Rear Wheel Speed Sensor: Plausibility against second signal failed due to monitoring of wheel speed differences.
- ESP_a077 — Re RWSS Direction Fault ESP_a077_ReRWSSDirectionFault Plausibility fault while monitoring of wheel direction. Check mounting position of front left wheel speed sensor
- ESP_a078 — Re RWSS Large Air Gap ESP_a078_ReRWSSLargeAirGap Wss fault due to Alignment or adjustment incorrect.
- ESP_a079 — Re RWSS Supply Short To Gnd ESP_a079_ReRWSSSupplyShortToGnd Right Rear Wheel Speed Sensor Supply Line Short to Gnd
- ESP_a080 — Re RWSS General Fault ESP_a080_ReRWSSGeneralFault Right Rear Wheel Speed Sensor Generic Fault.
- ESP_a081 — Pressure Sensor Short ESP_a081_PressureSensorShort Brake Pressure Sensor A: Line Short to Ground or Interruption.
- ESP_a082 — PMC Sensor Offset High ESP_a082_PMCSensorOffsetHigh Brake Pressure Sensor A: Adjustment not possible (Offset too large).
- ESP_a083 — PMC Sensor Fault ESP_a083_PMCSensorFault Brake Pressure Sensor A: Plausibility against second signal failed.
- ESP_a084 — Brake Fluid Reservoir Low ESP_a084_BrakeFluidReservoirLow Brake Fluid: Fluid level low. Ensure brake fluid levels are appropriate.
- ESP_a085 — Brake Switch Stuck High ESP_a085_BrakeSwitchStuckHigh Brake Pedal Switch A: Signal stuck high.
- ESP_a086 — Brake Switch Implausible1 ESP_a086_BrakeSwitchImplausible1 Brake Pedal Switch Plausibility monitor against master cylinder pressure sensor failed.
- ESP_a087 — Brake Switch Implausible3 ESP_a087_BrakeSwitchImplausible3 Brake Pedal Switch Plausibility monitor against master cylinder pressure sensor failed.
- ESP_a088 — Abs Continuous Control ESP_a088_absContinuousControl ABS Active Too Long.
- ESP_a089 — Abs No Pressure Increase ESP_a089_absNoPressureIncrease ABS controler has detected, that there has been no pressure increase for an implausible long time.
- ESP_a090 — Vdc Continuous Control ESP_a090_vdcContinuousControl Stability Control Active Too Long.
- ESP_a091 — CAN Undervoltage ESP_a091_CANUndervoltage CAN undervoltage detected.
- ESP_a092 — CAN Overvoltage ESP_a092_CANOvervoltage CAN overvoltage detected.
- ESP_a093 — Party Bus Off ESP_a093_partyBusOff The CAN Bus status is monitored cyclically, when ever there is a short circuit between CAN-H and CAN-L or a heavy bus disturbance which leads to BusOff, the fault is registerd
- ESP_a094 — Party Bus Passive ESP_a094_partyBusPassive The CAN Bus status is monitored cyclically, when ever there is a line interruption on can bus or disturbance which leads to Error passive, fault is registerd
- ESP_a095 — Chassis Bus Off ESP_a095_chassisBusOff The CAN Bus status is monitored cyclically, when ever there is a short circuit between CAN-H and CAN-L or a heavy bus disturbance which leads to BusOff, the fault is registerd
- ESP_a096 — Chassis Bus Passive ESP_a096_chassisBusPassive The CAN Bus status is monitored cyclically, when ever there is a line interruption on can bus or disturbance which leads to Error passive, fault is registerd
- ESP_a097 — Tcs Ref Speed Not Init ESP_a097_tcsRefSpeedNotInit An information that the system could not initialize completely because the environment conditions are not sufficient enough for a reliable vehicle speed calculation.
- ESP_a098 — Vdc Ref Speed Not Init ESP_a098_vdcRefSpeedNotInit An information that the system could not initialize completely because the environment conditions are not sufficient enough for a reliable vehicle speed calculation.
- ESP_a099 — Brake Temp Model Overheat ESP_a099_brakeTempModelOverheat Brake Temperauture Too High Algorithm Based Failure or BTM overheat warning is deactivated- information.
- ESP_a100 — Brake Temp Model Disabled ESP_a100_brakeTempModelDisabled Brake Temperauture Too High Algorithm Based Failure or BTM overheat warning is deactivated- information.