Secondary autopilot controller (B-side) alerts
Browse 263 APSB alert codes and open an entry for its description and recorded conditions.
APSB alert codes
Showing 151–200 of 263
- APSB_w198 — Tsr Unavailable APSB_w198_tsrUnavailable Traffic Sign Unavailable
- APSB_w199 — Apc Abort APSB_w199_apcAbort Autopark Aborted alert that logs when an Autopark or Summon maneuver has aborted due to driver actions or a condition internal or external to the vehicle.
- APSB_w200 — Lc Slowdown APSB_w200_lcSlowdown Lateral Control Slowing
- APSB_w201 — Lc Aborting APSB_w201_lcAborting Lateral Control Aborting
- APSB_w202 — Scw Noisy Environment APSB_w202_scwNoisyEnvironment High Noise in Ultrasonics
- APSB_w203 — Apc Activation APSB_w203_apcActivation Autopark Activated alert that logs when an Autopark maneuver is successfully initiated.
- APSB_w204 — Apc Final Front APSB_w204_apcFinalFront Autopark Front Measurements alert that logs when an Autopark or Summon maneuver is completed.
- APSB_w205 — Apc Final Rear APSB_w205_apcFinalRear Autopark Rear Measurements alert that logs when an Autopark or Summon maneuver is completed.
- APSB_w206 — Autosteer Not Enabled APSB_w206_autosteerNotEnabled
- APSB_w207 — Autosteer Unavailable APSB_w207_autosteerUnavailable
- APSB_w208 — Rack Detected APSB_w208_rackDetected Rear Rack Detected
- APSB_w209 — Auto Summon Request APSB_w209_autoSummonRequest Autopilot Processor Secondary receives Auto Summon request by a double-press of the park button on the stalk lever.
- APSB_w210 — Cam Obstrcted APSB_w210_camObstrcted Camera Obstructed
- APSB_w211 — Acc No Seat Belt APSB_w211_accNoSeatBelt Driver Seatbelt Unbuckled in ACC
- APSB_w212 — Lc Unavailable Strike Out APSB_w212_lcUnavailableStrikeOut LC Unavailable Struck Out
- APSB_w213 — Autosteer Struck Out APSB_w213_autosteerStruckOut Autosteer Struckout
- APSB_w214 — Driver Not Intracting APSB_w214_driverNotIntracting Driver Not Interacting
- APSB_w215 — Cont Driver Not Intracting APSB_w215_contDriverNotIntracting Continous Driver Not Interacting
- APSB_w216 — Driver Overriding APSB_w216_driverOverriding Driver Accel Pedal Override
- APSB_w217 — Lc Unavailable Speeding APSB_w217_lcUnavailableSpeeding LC Unavailable Speeding
- APSB_w218 — Lc Speed Exceeded Limit APSB_w218_lcSpeedExceededLimit Autopilot Speedlimit Exceeded
- APSB_w219 — Lc Temp Unavailable Speed APSB_w219_lcTempUnavailableSpeed Autopilot Unavailable Speed
- APSB_w220 — Lc Temp Unavailable Road APSB_w220_lcTempUnavailableRoad Autopilot Unavailable Road
- APSB_w221 — Acc Radar Blind APSB_w221_accRadarBlind ACC Unavailable - Radar Blind
- APSB_w222 — Acc Camera Blind APSB_w222_accCameraBlind ACC Unavailable - Camera Blind
- APSB_w223 — Acc Object In Path APSB_w223_accObjectInPath ACC Unavailable - Object In Path
- APSB_w224 — Acc Camera Calibration APSB_w224_accCameraCalibration ACC Unavailable - Camera Not Calibrated
- APSB_w225 — Lc Degraded Vis Speed Lmt APSB_w225_lcDegradedVisSpeedLmt Vision Degraded - Reduced ACC Speed
- APSB_w226 — Lc Cam Cal Needed Speed Lmt APSB_w226_lcCamCalNeededSpeedLmt Additional Cam Calibration Required
- APSB_w227 — Virtual Wall Blocked APSB_w227_virtualWallBlocked
- APSB_w229 — Alc Ultrasound Damaged APSB_w229_alcUltrasoundDamaged Auto lane change (ALC) is unavailable due to Autopilot electronic control unit (ECU) detecting damage to ultrasonic sensors.
- APSB_w230 — Alc Ultrasound Blocked APSB_w230_alcUltrasoundBlocked Auto lane change (ALC) is unavailable due to Autopilot electronic control unit (ECU) detecting blocked ultrasonic sensors.
- APSB_w231 — Idf Event APSB_w231_idfEvent APS_w231_idfEvent
- APSB_w232 — Lane Change Requested APSB_w232_laneChangeRequested DAS_w232_laneChangeRequested
- APSB_w235 — A72 Loop Detected APSB_w235_a72LoopDetected Autopilot Processor Secondary (APS) detects Autopilot Processor Primary (APP) or Autopilot Processor Backup (APB) boot loop.
- APSB_w236 — Can Shared Mem Error APSB_w236_canSharedMemError The shared memory region setup between Autopilot Processor Secondary (APS) and Autopilot Processor Primary (APP) fails.
- APSB_w237 — Fault Mgr Event Detected APSB_w237_faultMgrEventDetected Autopilot Processor Secondary (APS) detects a fault in the Security Gate Keeper (SGK) fault manager.
- APSB_w238 — Reset Reason APSB_w238_resetReason Indicates the reason for an Always On (AON) reset.
- APSB_w241 — Ddr Init Failures APSB_w241_ddrInitFailures The Autopilot electronic control unit (ECU) detects an unexpected Double Data Rate Synchronous Dynamic Random-Access Memory (DDR SDRAM) initialization failure.
- APSB_w242 — Trip MBIST Failure APSB_w242_tripMBISTFailure Indicates the reason for the Tesla Inference Processor (TRIP) issue reported by the memory built-in self-test (MBIST). Autopilot features are unavailable.
- APSB_w243 — Trip HW Error Status APSB_w243_tripHWErrorStatus The Tesla Inference Processor (TRIP) reports a hardware condition. Autopilot features are unavailable.
- APSB_w244 — Gpu HW Fault Status APSB_w244_gpuHWFaultStatus The Autopilot electronic control unit (ECU) reports a graphic processing unit (GPU) hardware condition. Autopilot features are unavailable.
- APSB_w245 — Eloop Rx From Unexpected Source MAC APSB_w245_eloopRxFromUnexpectedSourceMAC Autopilot Processor Secondary (APS) received a frame from an unexpected Media Access Control (MAC) source. The payload has a 6 byte MAC address of an unknown source and the address is in the decimal number system. While this condition is p…
- APSB_w246 — Ethloop Switch Port Link Down APSB_w246_ethloopSwitchPortLinkDown The APS detects that a port of the etherloop switch has a link down, indicating a condition affecting the cabling or the electronic control unit (ECU) connected to that port. On turbo A, Port 2 is connected to RIGHT controller. On turbo B,…
- APSB_w247 — Ethernet Frame Error APSB_w247_ethernetFrameError The Autopilot Processor Secondary (APS) detects that it received a frame with errors. These frames are not processed
- APSB_w248 — Ethloop Switch Poor Sqi APSB_w248_ethloopSwitchPoorSqi The Autopilot Secondary (APS) detects poor signal quality on one or more ports of the etherloop switch.
- APSB_w249 — Ufs Failures APSB_w249_ufsFailures The Autopilot Electronic Control Unit (ECU) detects an unexpected condition affecting the Universal Flash Storage (UFS).
- APSB_w250 — Ethloop Switch Mem Usage Too High Port2 APSB_w250_ethloopSwitchMemUsageTooHighPort2 The Autopilot Secondary (APS) detects the memory usage above threshold on the Rx or Tx queues of the etherloop switch port 2.
- APSB_w251 — Ethloop Switch Mem Usage Too High Port3 APSB_w251_ethloopSwitchMemUsageTooHighPort3 The Autopilot Secondary (APS) detects the memory usage above threshold on the Rx or Tx queues of the etherloop switch port 3.
- APSB_w252 — Eth Switch Port Link Down APSB_w252_ethSwitchPortLinkDown The Autopilot electronic control unit (ECU) detects that the Media Control Unit (MCU) port connected to the ethernet switch has a link down, indicating a condition affecting the cabling or the ECU connected to that port.