TRCM_a609 — Loop8 Asic Startup Diagnostic Failure
Full alert identifier: TRCM_a609_loop8AsicStartupDiagnosticFailure
Alert description
One or more problems were detected with the ASIC deployment channel for loop 8.
Potential impact
This information is not available in the alert reference.
Set condition
This information is not available in the alert reference.
Clear condition
This information is not available in the alert reference.
Signals to check
These diagnostic fields are associated with TRCM_a609. Check the alert's Payload in Service Mode Plus for available values.
| Signal | Unit |
|---|---|
Current Source Test Failed
TRCM_
|
— |
Deployment Counter Auto Safe Val
TRCM_
|
— |
Deployment Counter Dwell Time Val
TRCM_
|
— |
Deployment Counter High Current Cleanup
TRCM_
|
— |
Deployment Counter High Current Reset
TRCM_
|
— |
Deployment Counter High Current Val
TRCM_
|
— |
Deployment Counter Low Current Cleanup
TRCM_
|
— |
Deployment Counter Low Current Reset
TRCM_
|
— |
Show 15 more fields
| Signal | Unit |
|---|---|
Deployment Counter Low Current Val
TRCM_
|
— |
Hs Fet Failed Short Suspected
TRCM_
|
— |
Hs Fet Test Aborted
TRCM_
|
— |
Hs Fet Test Failed
TRCM_
|
— |
Leakage To Bat
TRCM_
|
— |
Leakage To Gnd
TRCM_
|
— |
Ls Fet Test Aborted
TRCM_
|
— |
Ls Fet Test Failed
TRCM_
|
— |
Safing Fet Off Ss Voltage Low
TRCM_
|
— |
Safing Fet On Ss Voltage Low
TRCM_
|
— |
Ss Pin Disconnected
TRCM_
|
— |
Vrcm Current Source Test Sfx Broken
TRCM_
|
— |
Vrcm Current Source Test Sfx Stg
TRCM_
|
— |
Vrcm Current Source Test Srx Broken
TRCM_
|
— |
Vrcm Current Source Test Srx Stb
TRCM_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of TRCM_a609.