TRCM_a037 — Near Deploy
Full alert identifier: TRCM_a037_nearDeploy
Message shown in the car
Safety restraint system issue Service is required
Alert description
Restraint Control Module (RCM) reported near deploy event detected. This alert indicates that the vehicle was involved in a collision that did not reach the threshold for pyrotechnic device deployment but was significant enough to warrant logging.
Potential impact
The restraint system may not function as designed for subsequent events. System inspection may be recommended to ensure proper operation.
Set condition
The vehicle was in an accident which did not result in a pyrotechnic event but exceeded the threshold for logging a significant impact.
Clear condition
The restraint control module is power cycled and the near deploy event record is cleared.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Event Accel Pedal Pos
TRCM_
|
% |
Event Vehicle Speed
TRCM_
|
kph |
| Signal | Unit |
|---|---|
Event Arm Status
TRCM_
|
— |
Event Driver Brake Apply
TRCM_
|
— |
Event Front Left Seatbelt
TRCM_
|
— |
Event Front Right Seatbelt
TRCM_
|
— |
Near Deploy Front
TRCM_
|
— |
Near Deploy Left
TRCM_
|
— |
Near Deploy Rear
TRCM_
|
— |
Near Deploy Right
TRCM_
|
— |
Show 1 more field
| Signal | Unit |
|---|---|
Near Deploy Roll
TRCM_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of TRCM_a037.