TRCM_a036 — Crash Detected

Full alert identifier: TRCM_a036_crashDetected

Message shown in the car

Safety restraint system issue Service is required

Alert description

Restraint Control Module (RCM) reported crash event detected. This alert indicates that the vehicle was involved in a collision that resulted in deployment of pyrotechnic safety devices.

Potential impact

The Safety Restraint System may not perform as designed for subsequent events. System inspection and potential replacement may be required.

Set condition

The vehicle was in an accident which resulted in a pyrotechnic device deployment by the Safety Restraint System.

Clear condition

The restraint control module is power cycled and the crash event record is cleared.

Signals to check

Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.

Signal	Unit
Event Accel Pedal Pos `TRCM_a036_eventAccelPedalPos` 255 SNA	%
Event Vehicle Speed `TRCM_a036_eventVehicleSpeed`	kph

Signal	Unit
Collision Severity `TRCM_a036_collisionSeverity` 0 PRETENSIONER 1 FIRST STAGE 2 SECOND STAGE 3 PEDPRO EVENT	—
Collision Type `TRCM_a036_collisionType` 0 NOT CLASSIFIED 1 FRONT 2 LEFTSIDE 3 RIGHTSIDE 5 REAR 6 ROLLOVER 7 PEDPRO 8 SNA	—
Event Arm Status `TRCM_a036_eventArmStatus` 0 UNARMED 1 ARMED	—
Event Driver Brake Apply `TRCM_a036_eventDriverBrakeApply` 0 NotInit orOff 1 Not Applied 2 Driver applying brakes 3 Faulty SNA	—
Event Front Left Seatbelt `TRCM_a036_eventFrontLeftSeatbelt` 0 UNLATCHED 1 LATCHED	—
Event Front Right Seatbelt `TRCM_a036_eventFrontRightSeatbelt` 0 UNLATCHED 1 LATCHED	—

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of TRCM_a036.