Tesla air suspension controller alerts
Browse 179 TAS alert codes and open an entry for its description and recorded conditions.
TAS alert codes
Showing 151–179 of 179
- TAS_a301 — Offset Estimate Data2 TAS_a301_offsetEstimateData2 Firmware debug alert.
- TAS_a303 — Mass Estimate Frozen TAS_a303_massEstimateFrozen Firmware debug alert.
- TAS_a304 — Mass Estimate Frozen Data TAS_a304_massEstimateFrozenData Firmware debug alert.
- TAS_a305 — New Endstop Position TAS_a305_newEndstopPosition Firmware debug alert.
- TAS_a306 — Hardware Protect Frozen TAS_a306_hardwareProtectFrozen Firmware debug alert.
- TAS_a307 — Endstop Boundary Comp TAS_a307_endstopBoundaryComp Firmware debug alert.
- TAS_a308 — Endstop Boundary Rbnd TAS_a308_endstopBoundaryRbnd Firmware debug alert.
- TAS_a309 — Control Frozen TAS_a309_controlFrozen Firmware debug alert.
- TAS_a310 — Control Frozen Data TAS_a310_controlFrozenData Firmware debug alert.
- TAS_a311 — Accels MIA TAS_a311_accelsMIA Vehicle body accelerations are unknown.
- TAS_a312 — Rotational Rates MIA TAS_a312_rotationalRatesMIA Vehicle body rotational rates are unknown.
- TAS_a313 — Damping Cntrl Disabled TAS_a313_dampingCntrlDisabled The Tesla Air Suspension controller (TAS) electronic control unit (ECU) detects multiple missing controller area network (CAN) inputs, and as a result adaptive ride control is disabled.
- TAS_a314 — Damping Reduced TAS_a314_dampingReduced The Tesla Air Suspension controller (TAS) detects a condition affecting the Adaptive Suspension Damping system.
- TAS_a315 — Pcba High Temp TAS_a315_pcbaHighTemp Firmware debug alert.
- TAS_a316 — Offsets Accels TAS_a316_offsetsAccels Debug alert 316 for inertial accelerometer offsets
- TAS_a317 — Offsets Rotational Rates TAS_a317_offsetsRotationalRates Debug alert 317 for inertial accelerometer offsets
- TAS_a318 — Damping Cntrl Input MIA TAS_a318_dampingCntrlInputMIA Debug alert 318 for missing damping input data.
- TAS_a319 — Drivetrain Type Mismatch TAS_a319_drivetrainTypeMismatch The drivetrain type configuration value reported by the vehicle gateway (GTW) does not match the drivetrain type type supported by the firmware version running on the Tesla Air Suspension (TAS) electronic control unit (ECU).
- TAS_a320 — Offsets Rotational Rates TAS_a320_offsetsRotationalRates Debug alert for high rotational rate offsets.
- TAS_a321 — Speed Bump Attributes1 TAS_a321_speedBumpAttributes1 Data aggregation alert for speed bump profiling.
- TAS_a322 — Speed Bump Attributes2 TAS_a322_speedBumpAttributes2 Data aggregation alert for speed bump profiling.
- TAS_a332 — Leveling Thresholds1 TAS_a332_levelingThresholds1 Firmware debug alert.
- TAS_a333 — Leveling Thresholds2 TAS_a333_levelingThresholds2 Firmware debug alert.
- TAS_a334 — Front Axle Mass Overloaded TAS_a334_frontAxleMassOverloaded The Tesla Adaptive Suspension (TAS) electronic control unit (ECU) detects the front axle mass is above the operating limit.
- TAS_a335 — Rear Axle Mass Overloaded TAS_a335_rearAxleMassOverloaded The Tesla Adaptive Suspension (TAS) electronic control unit (ECU) detects the rear axle mass is above the operating limit.
- TAS_a336 — Vehicle Mass Overloaded TAS_a336_vehicleMassOverloaded The Tesla Adaptive Suspension (TAS) electronic control unit (ECU) detects the vehicle mass is above the operating limit.
- TAS_a337 — Front Axle Mass Near Overload TAS_a337_frontAxleMassNearOverload The Tesla Adaptive Suspension (TAS) Electronic Control Unit (ECU) detects the front axle mass is near the operating limit.
- TAS_a338 — Rear Axle Mass Near Overload TAS_a338_rearAxleMassNearOverload The Tesla Adaptive Suspension (TAS) Electronic Control Unit (ECU) detects the rear axle mass is near the operating limit.
- TAS_a339 — Vehicle Mass Near Overload TAS_a339_vehicleMassNearOverload The Tesla Adaptive Suspension (TAS) Electronic Control Unit (ECU) detects the vehicle mass is near the operating limit.