Drive interface alerts

DI alert codes

Showing 1–50 of 228

• DI_a001 — Frunk Speed Limit Active DI_a001_frunkSpeedLimitActive User has overridden frunk state
• DI_a003 — Suggested Gear Override DI_a003_suggestedGearOverride Drive Inverter Warning: suggested gear overridden by user
• DI_a004 — Smart Shift Unavailable DI_a004_smartShiftUnavailable The drive interface (DI) electronic control unit (ECU) detects that Auto Shift out of Park is unavailable.
• DI_a006 — Shifter Unavailable DI_a006_shifterUnavailable The drive interface (DI) electronic control unit (ECU) detects that the touch screen and secondary shifter (CCCM or PRND) are unavailable.
• DI_a007 — Sec Gear Sel Button Stuck DI_a007_secGearSelButtonStuck The drive interface (DI) electronic control unit (ECU) detects that the secondary shifter module (CCCM or PRND) button is falsely pressed.
• DI_a008 — Rear Left Unit Disabled DI_a008_rearLeftUnitDisabled The drive inverter (DI) electronic control unit (ECU) is unable to command a unit torque request to the rear left drive inverter (DIREL) ECU because the rear left drive unit is disabled. This alert is set in addition to one or more DIREL a…
• DI_a009 — Rear Right Unit Disabled DI_a009_rearRightUnitDisabled The drive inverter (DI) electronic control unit (ECU) is unable to command a unit torque request to the rear right drive inverter (DIRER) ECU because the rear right drive unit is disabled. This alert is set in addition to one or more DIRER…
• DI_a010 — Unintended Reset DI_a010_unintendedReset The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) resets for an unintended reason, such as a watchdog timeout.
• DI_a011 — Usm MIA DI_a011_usmMIA The drive interface (DI) electronic control unit (ECU) detects that the ultrasonic sensor module (USM) controller area network (CAN) node is missing (MIA).
• DI_a012 — Accel5 V Supply DI_a012_accel5VSupply The drive interface (DI) electronic control unit (ECU) detects in software that a reference voltage supplied to the accelerator pedal sensor is out of bounds.
• DI_a013 — Ecc Error DI_a013_eccError The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a RAM read or embedded conveyor controller (ECC) flash fetch issue.
• DI_a014 — Sec Gear Sel Activated DI_a014_secGearSelActivated Drive Inverter Warning: Secondary Shifter activated
• DI_a015 — Immobilizer DI_a015_immobilizer The drive interface (DI) electronic control unit (ECU) detects an issue with the immobilizer.
• DI_a016 — Park Request By PM DI_a016_parkRequestByPM The pedal monitor (PM) requests that the drive interface (DI) electronic control unit (ECU) shift into a non-torque gear (Park or Neutral) at a low speed.
• DI_a017 — Hw Pedal Monitor DI_a017_hwPedalMonitor The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a condition that leads to the pedal monitor (PM) disabling powertrain.
• DI_a018 — Hw LV Supply UV DI_a018_hwLVSupplyUV The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a low voltage (LV) battery undervoltage event.
• DI_a019 — Hw Accel Pedal Power DI_a019_hwAccelPedalPower The drive interface (DI) electronic control unit (ECU) detects in hardware that the accelerator pedal power supply is under voltage.
• DI_a020 — System Hvil Not Closed DI_a020_systemHvilNotClosed The drive interface (DI) electronic control unit (ECU) detects that the high voltage interlock loop (HVIL) is not closed.
• DI_a021 — Pack Overvoltage DI_a021_packOvervoltage The drive interface (DI) electronic control unit (ECU) detects that the high voltage (HV) battery pack is over voltage enough to temporarily disable regenerative braking.
• DI_a022 — Hw5v Supply UV DI_a022_hw5vSupplyUV The drive interface (DI) or drive inverter (DIx) electronic control unit (ECU) detects a 5V supply is under voltage.
• DI_a023 — Car Not Parked DI_a023_carNotParked The drive interface (DI) electronic control unit (ECU) detects that the electronic park brake (EPC) ECU is missing (MIA) and as a result cannot honor the park request.
• DI_a025 — Regen Backfill Unavailable DI_a025_regenBackfillUnavailable Regenerative braking (regen) backfill braking torque is unavailable, requiring driver to apply brake pedal more frequently to decelerate / stop.
• DI_a026 — Park Pressed With High A Pedal DI_a026_parkPressedWithHighAPedal Detects when Park button is pressed during prolonged high A-pedal application, which is used to detect potential pedal misapplications.
• DI_a031 — Closure Acceleration Limit DI_a031_closureAccelerationLimit Acceleration is limited due to a closure being open at low speed.
• DI_a032 — Speed Limit Very High Ride Height DI_a032_speedLimitVeryHighRideHeight The drive interface (DI) electronic control unit (ECU) has limited vehicle speed for VERY HIGH ride height
• DI_a033 — Speed Limit Extract Ride Height DI_a033_speedLimitExtractRideHeight The drive interface (DI) electronic control unit (ECU) has limited vehicle speed for EXTRACT ride height
• DI_a036 — Sys Standby Unit Limited Wait DI_a036_sysStandbyUnitLimitedWait The drive interface (DI) electronic control unit (ECU) detects that system start conditions are met with at least one faulted unit.
• DI_a038 — Idle Task Starving DI_a038_idleTaskStarving The drive interface (DI) electronic control unit (ECU) detects Idle task has not run for more than a second
• DI_a039 — Exception Undefined Instruction DI_a039_exceptionUndefinedInstruction The Drive Interface (DI) processor has detected an internal exception.
• DI_a040 — Dif MIA DI_a040_difMIA The drive interface (DI) electronic control unit (ECU) detects that the front drive interface (DIF) controller area network (CAN) node is missing (MIA).
• DI_a041 — Driver Brake Apply Stuck DI_a041_driverBrakeApplyStuck Drive Inverter Warning: Report of Driver Brake Apply for false-detection diagnostic
• DI_a042 — Pmf MIA DI_a042_pmfMIA The drive interface (DI) electronic control unit (ECU) detects that the front propulsion monitor (PMF) controller area network (CAN) node is missing (MIA).
• DI_a043 — Pmr MIA DI_a043_pmrMIA The drive interface (DI) electronic control unit (ECU) detects that the rear propulsion monitor (PMR) controller area network (CAN) node is missing (MIA).
• DI_a044 — Pmrel MIA DI_a044_pmrelMIA The drive interface (DI) electronic control unit (ECU) detects that the rear-left propulsiom monitor (PMREL) controller area network (CAN) node is missing (MIA).
• DI_a045 — Pmrer MIA DI_a045_pmrerMIA The drive interface (DI) electronic control unit (ECU) detects that the rear-right propulsion monitor (PMRER) controller area network (CAN) node is missing (MIA).
• DI_a046 — Direl MIA DI_a046_direlMIA The drive interface (DI) electronic control unit (ECU) detects that the rear-left drive inverter (DIREL) controller area network (CAN) node is missing (MIA).
• DI_a047 — Direr MIA DI_a047_direrMIA The drive interface (DI) electronic control unit (ECU) detects that the rear-right drive inverter (DIRER) controller area network (CAN) node is missing (MIA).
• DI_a048 — Ecu Log Available DI_a048_ecuLogAvailable Triggers ODIN service to upload log buffer
• DI_a049 — P0632 DI ECU Odometer Not Programmed DI_a049_P0632_DI_ECU_OdometerNotProgrammed Invalid Odometer DTC confirmed for Drive Inverter
• DI_a050 — P1234 DI ECU Demo Timer DI_a050_P1234_DI_ECU_DemoTimer Demo Timer DTC confirmed for Drive Inverter
• DI_a051 — Battery Overcurrent DI_a051_batteryOvercurrent The drive interface (DI) electronic control unit (ECU) detects a high voltage (HV) battery overcurrent event in software.
• DI_a052 — Dir MIA DI_a052_dirMIA The drive interface (DI) electronic control unit (ECU) detects that the rear drive interface (DIR) controller area network (CAN) node is missing (MIA).
• DI_a053 — Can Data Bus C DI_a053_canDataBusC The drive interface (DI) electronic control unit (ECU) receives a controller area network (CAN) message error on bus C.
• DI_a054 — Can Overrun Bus C DI_a054_canOverrunBusC There is a controller area network (CAN) overrun error for a given CAN ID (bus C).
• DI_a055 — Can Hardware Bus C DI_a055_canHardwareBusC
• DI_a056 — Can Data Bus D DI_a056_canDataBusD The drive interface (DI) electronic control unit (ECU) receives a controller area network (CAN) message error on bus D.
• DI_a057 — Can Overrun Bus D DI_a057_canOverrunBusD There is a controller area network (CAN) overrun error for a given CAN ID (bus D).
• DI_a058 — Can Hardware Bus D DI_a058_canHardwareBusD
• DI_a059 — Can Data Bus E DI_a059_canDataBusE The drive interface (DI) electronic control unit (ECU) receives a controller area network (CAN) message error on bus E.
• DI_a060 — Can Overrun Bus E DI_a060_canOverrunBusE There is a controller area network (CAN) overrun error for a given CAN ID (bus E).