Primary autopilot processor alerts

APP alert codes

Showing 301–336 of 336

• APP_w367 — Fascia Cam Cal Saved APP_w367_fasciaCamCalSaved New fascia camera calibration values are available
• APP_w368 — Fascia Cam Type Mismatch APP_w368_fasciaCamTypeMismatch Unexpected physical attribute detected for fascia camera - no service action needed
• APP_w369 — Cruise With Single Click APP_w369_cruiseWithSingleClick Traffic-Aware Cruise Control (TACC) cannot be activated while the Single Click or Single Pull setting is enabled on a vehicle with Autosteer or Full Self-Driving (FSD) enabled in settings. To use TACC, the Double Click or Double Pull setti…
• APP_w370 — Acc Ap Unav User Settings APP_w370_accApUnavUserSettings Traffic-Aware Cruise Control (TACC) or Autosteer is unable to engage due to current Autopilot settings.
• APP_w371 — Network Loading Issue APP_w371_networkLoadingIssue Autopilot vision networks encountered an initialization error and are disabled. Some vision networks require additional initialization.
• APP_w372 — Cabin Camera Blocked APP_w372_cabinCameraBlocked Driver monitoring features may be limited or unavailable due to cabin camera obstruction.
• APP_w373 — Gnss Uart Error APP_w373_gnssUartError GNSS UART has encountered an error receiving data.
• APP_w374 — Gnss Uart Data Mia APP_w374_gnssUartDataMia Autopilot board has stopped receiving GNSS UART data.
• APP_w375 — Gnss Pps Mia APP_w375_gnssPpsMia GNSS PPS (Pulse Per Second) signal has stopped being received.
• APP_w376 — Wheeltick Count Mia APP_w376_wheeltickCountMia Wheeltick count signal missing.
• APP_w377 — Ap Imu Mia APP_w377_apImuMia Autopilot IMU readings stopped being received.
• APP_w378 — Ublox Imu Mia APP_w378_ubloxImuMia U-blox IMU readings not received.
• APP_w379 — Positioning Engine Mia APP_w379_positioningEngineMia Positioning engine output not received.
• APP_w380 — Gnss Pps Timestamp Issue APP_w380_gnssPpsTimestampIssue Discontinuity in PPS (Pulse Per Second) output rate.
• APP_w381 — Ap Imu Timestamp Issue APP_w381_apImuTimestampIssue Discontinuity in Autopilot IMU timestamps.
• APP_w382 — Ublox Imu Timestamp Issue APP_w382_ubloxImuTimestampIssue Discontinuity in u-blox IMU timestamps.
• APP_w383 — Many Ap Reboots While In P APP_w383_manyApRebootsWhileInP Autopilot computer has booted a significant number of times while the vehicle is parked.
• APP_w384 — Pos Engine Init In Motion APP_w384_posEngineInitInMotion Positioning engine slow to start up; vehicle has already started moving.
• APP_w385 — Pos Engine Unhealthy APP_w385_posEngineUnhealthy The positioning engine is unhealthy and the Autopilot system is using an alternative GNSS solution.
• APP_w386 — Radar Only Braking Event APP_w386_radarOnlyBrakingEvent The Autopilot electronic control unit (ECU) has estimated a potential impending collision using measurements only from the radar.
• APP_w387 — Radar Blockage Detected APP_w387_radarBlockageDetected The Autopilot electronic control unit (ECU) has detected that the forward facing radar is blind
• APP_w388 — Windshield Camera Heater Faulted APP_w388_windshieldCameraHeaterFaulted The Autopilot electronic control unit (ECU) has detected a hardware condition affecting the windshield camera heater system.
• APP_w389 — Cam Fov Residue Detected APP_w389_camFovResidueDetected Residue on glass in camera field of view detected.
• APP_w390 — Cabin Cam Vis Degraded APP_w390_cabinCamVisDegraded Driver monitoring features may be limited due to degraded driver visibility. View cabin camera stream preview from service menu to identify obstructions that may degrade driver visibility.
• APP_w391 — Cabin Camera Blockedon AP APP_w391_cabinCameraBlockedonAP Cabin camera detected as blocked / not having adequate visibility while Autosteer / Full Self-Driving (FSD) is engaged. Driver monitoring features may be limited or unavailable, which may affect whether Autosteer / FSD remains engaged.
• APP_w392 — Fsd Suspended APP_w392_fsdSuspended Indicates that Autosteer / Full Self-Driving (FSD) has been suspended.
• APP_w393 — Attn Mntr Unavailable APP_w393_attnMntrUnavailable The driver attention based driver monitoring feature conditions are not met for enablement
• APP_w394 — Ap Imu Gross Errors APP_w394_apImuGrossErrors Autopilot IMU gross errors occured.
• APP_w395 — Cabin Camera LED Fault Svc APP_w395_cabinCameraLEDFaultSvc The Autopilot electronic control unit (ECU) detects the cabin camera (selfie cam) has low cabin illumination levels. Low quality data from the cabin camera may limit or make unavailable some Autopilot features.
• APP_w396 — Severe Residue Detected APP_w396_severeResidueDetected There is a severe amount of dirt and debris on the windshield glass surface obstructing the front cameras field of view. Vehicle functions relying on the front cameras will be affected or unavailable.
• APP_w397 — Ap Feat Disabled Permanent APP_w397_apFeatDisabledPermanent User notification that Autopilot features are not available, and will not become available again until the underlying hardware issue is resolved. The payload signal(s) indicate the specific condition(s) affecting Autopilot functionality.
• APP_w398 — Imu Output Unhealthy APP_w398_imuOutputUnhealthy The Autopilot electronic control unit (ECU) detects issues with the IMU output.
• APP_w399 — Brakebooster Mia APP_w399_brakeboosterMia One or more of the messages the Autopilot electronic control unit (ECU) receives periodically from the Brake Booster (BB) is not received on the Party bus, indicating the brake ECU may be unavailable (MIA).
• APP_w400 — Selfie Camera Fan Fault APP_w400_selfieCameraFanFault The selfie camera fan speed is lower than expected.
• APP_w401 — Left Pillar Camera Heater Faulted APP_w401_leftPillarCameraHeaterFaulted The Autopilot electronic control unit (ECU) has detected a hardware condition affecting the left pillar camera heater system.
• APP_w402 — Right Pillar Camera Heater Faulted APP_w402_rightPillarCameraHeaterFaulted The Autopilot electronic control unit (ECU) has detected a hardware condition affecting the right pillar camera heater system.