Skip to content

VCFRONT_a294 — Left Side Repeater Light Fault

Full alert identifier: VCFRONT_a294_leftSideRepeaterLightFault

Alert description

The vehicle controller detects a condition affecting the left side repeater light.

Potential impact

When the left turn indicator is on, the left side repeater light may blink at double the normal speed, may not produce light, and/or may not function as expected.

Set condition

The vehicle controller detects that the left side repeater light high side driver (HSD) reports one of the following: (1) a current draw below the minimum threshold (open circuit); (2) a current draw above the maximum threshold (short circuit).

Clear condition

The vehicle controller detects that the left side repeater light high side driver (HSD) reports a current draw between the minimum and maximum expected thresholds while the light is turned on.

Signals to check

These diagnostic fields are associated with VCFRONT_a294. Check the alert's Alert Log in Service Mode Plus for available values.

Signal Unit
Current Sense Faulted VCFRONT_a294_currentSenseFaulted —
Output Faulted VCFRONT_a294_outputFaulted —
Over Current VCFRONT_a294_overCurrent —
Over Temperature VCFRONT_a294_overTemperature —
Temp Sense Faulted VCFRONT_a294_tempSenseFaulted —
Under Current VCFRONT_a294_underCurrent —

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of VCFRONT_a294.

Browse all VCFRONT alert codes