EGGREAR1_a110 — GTW MIA

Full alert identifier: EGGREAR1_a110_GTW_MIA

Alert description

One or more expected Controller Area Network (CAN) messages from the vehicle gateway (GTW) was not received. Vehicle functions that depend on CAN messages from the GTW may be unavailable, or their performance may be affected.

Potential impact

Vehicle functions that depend on CAN messages from the vehicle gateway (GTW) may be unavailable, or their performance may be affected.

Set condition

An expected CAN message from the vehicle gateway (GTW) has not been received within the expected timeout, or the message drop rate is too high while the GTW is CAN active.

Clear condition

All expected CAN messages from the vehicle gateway (GTW) are received, or the GTW is CAN inactive.

Signals to check

These diagnostic fields are associated with EGGREAR1_a110. Check the alert's Alert Log in Service Mode Plus for available values.

Signal	Unit
DIPR Car Config `EGGREAR1_a110_DIPR_carConfig`	—
EGGLEFTPRIV Bmp Debug `EGGREAR1_a110_EGGLEFTPRIV_bmpDebug`	—
EGGLEFTPRIV Can Log Availability `EGGREAR1_a110_EGGLEFTPRIV_canLogAvailability`	—
EGGLEFTPRIV Car Config `EGGREAR1_a110_EGGLEFTPRIV_carConfig`	—
EGGLEFTPRIV Car State `EGGREAR1_a110_EGGLEFTPRIV_carState`	—
EGGLEFTPRIV Gear Control `EGGREAR1_a110_EGGLEFTPRIV_gearControl`	—
EGGLEFTPRIV Loop Nm `EGGREAR1_a110_EGGLEFTPRIV_loopNm`	—
EGGLEFTPRIV Mcu Uv Prot Self Test `EGGREAR1_a110_EGGLEFTPRIV_mcuUvProtSelfTest`	—

Show 34 more fields

Signal	Unit
EGGLEFTPRIV Mismatch Fault `EGGREAR1_a110_EGGLEFTPRIV_mismatchFault`	—
EGGLEFTPRIV Time `EGGREAR1_a110_EGGLEFTPRIV_time`	—
EGGLEFTPRIV Update Status `EGGREAR1_a110_EGGLEFTPRIV_updateStatus`	—
EGGREARPRIV Bmp Debug `EGGREAR1_a110_EGGREARPRIV_bmpDebug`	—
EGGREARPRIV Can Log Availability `EGGREAR1_a110_EGGREARPRIV_canLogAvailability`	—
EGGREARPRIV Car Config `EGGREAR1_a110_EGGREARPRIV_carConfig`	—
EGGREARPRIV Car State `EGGREAR1_a110_EGGREARPRIV_carState`	—
EGGREARPRIV Gear Control `EGGREAR1_a110_EGGREARPRIV_gearControl`	—
EGGREARPRIV Loop Nm `EGGREAR1_a110_EGGREARPRIV_loopNm`	—
EGGREARPRIV Network Management `EGGREAR1_a110_EGGREARPRIV_networkManagement`	—
EGGREARPRIV Update Status `EGGREAR1_a110_EGGREARPRIV_updateStatus`	—
EGGRIGHTPRIV Can Log Availability `EGGREAR1_a110_EGGRIGHTPRIV_canLogAvailability`	—
EGGRIGHTPRIV Car Config `EGGREAR1_a110_EGGRIGHTPRIV_carConfig`	—
EGGRIGHTPRIV Loop Nm `EGGREAR1_a110_EGGRIGHTPRIV_loopNm`	—
EGGRIGHTPRIV Update Status `EGGREAR1_a110_EGGRIGHTPRIV_updateStatus`	—
LC Car Config `EGGREAR1_a110_LC_carConfig`	—
LC Time `EGGREAR1_a110_LC_time`	—
LOOP Can Log Availability `EGGREAR1_a110_LOOP_canLogAvailability`	—
LOOP Car Config `EGGREAR1_a110_LOOP_carConfig`	—
LOOP Car State `EGGREAR1_a110_LOOP_carState`	—
LOOP Gear Control `EGGREAR1_a110_LOOP_gearControl`	—
LOOP Time `EGGREAR1_a110_LOOP_time`	—
LOOP Update Status `EGGREAR1_a110_LOOP_updateStatus`	—
RC Car Config `EGGREAR1_a110_RC_carConfig`	—
RC Ch Nm `EGGREAR1_a110_RC_chNm`	—
RC Time `EGGREAR1_a110_RC_time`	—
REARSTEER Time `EGGREAR1_a110_REARSTEER_time`	—
THERMAL Can Log Availability `EGGREAR1_a110_THERMAL_canLogAvailability`	—
THERMAL Car Config `EGGREAR1_a110_THERMAL_carConfig`	—
THERMAL Car State `EGGREAR1_a110_THERMAL_carState`	—
THERMAL Gear Control `EGGREAR1_a110_THERMAL_gearControl`	—
THERMAL Mismatch Fault `EGGREAR1_a110_THERMAL_mismatchFault`	—
THERMAL Time `EGGREAR1_a110_THERMAL_time`	—
THERMAL Update Status `EGGREAR1_a110_THERMAL_updateStatus`	—

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of EGGREAR1_a110.